645678
43
Zoom out
Zoom in
Previous page
1/72
Next page
Procedure
1. Make sure that the burner mat is attached to the burner.
2. Spread the pebbles evenly on the burner bed.
3. Install the glass. Refer to chapter
6.2.2
.
5
5.5 Do a final check on the fireplace
Safety conditions
Caution:
Wait 4 weeks after the installation before you use the fireplace. The cement
needs to harden. A final check on the fireplace can be done directly after the
installation.
Procedure
1. Start the appliance and do a check on the ignition of the pilot light and main burner.
The ignition must be quiet and must produce a calm flame. To start the appliance,
refer to the user manual.
2. Do a check on the main burner. The flames increase in height and change from blue/
yellow to yellow.
3. If all flames are yellow, the appliance is ready for use.
Prepare the appliance for use
Large 3
43
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires ROOM DIVIDER LARGE 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires ROOM DIVIDER LARGE 3 in the language / languages: English as an attachment in your email.

The manual is 3.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires ROOM DIVIDER LARGE 3

Bellfires ROOM DIVIDER LARGE 3 Additional guide - English - 96 pages

Bellfires ROOM DIVIDER LARGE 3 User Manual - English - 36 pages

Bellfires ROOM DIVIDER LARGE 3 Additional guide - German - 100 pages

Bellfires ROOM DIVIDER LARGE 3 Installation Guide - German - 84 pages

Bellfires ROOM DIVIDER LARGE 3 User Manual - German - 40 pages

Bellfires ROOM DIVIDER LARGE 3 Additional guide - Dutch - 100 pages

Bellfires ROOM DIVIDER LARGE 3 Installation Guide - Dutch - 84 pages

Bellfires ROOM DIVIDER LARGE 3 User Manual - Dutch - 36 pages

Bellfires ROOM DIVIDER LARGE 3 Additional guide - French - 100 pages

Bellfires ROOM DIVIDER LARGE 3 Installation Guide - French - 76 pages

Bellfires ROOM DIVIDER LARGE 3 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info