645678

Bellfires ROOM DIVIDER LARGE 3 Manual

33
Zoom out
Zoom in
Previous page
1/72
Next page
4
4.7 Build the fireplace
Caution:
• Remove the metal side panels and the metal front panel of the frame to
prevent damage of the frame during work. Refer to chapter
6.2.1
.
• Remove the 3 glass panes from the appliance. Refer to chapter
6.2.1
for
the procedure on how to do this.
• Remove all boxes, the ceramic log set and documents from the appliance.
• Make sure that the gas piping remains free of cement or other building
material. Otherwise, the gas piping can start to leak.
• Make sure that brickwork is build with a clearing of at least 3 mm between
the sides and top of the appliance and the brickwork. The appliance can
expand during operation due to heating.
• Do not use masking tape on the appliance. Masking tape can damage the
finish of the appliance.
• Do not build the brickwork higher than the casing without the use of a
mantel iron.
Note:
• Make sure that the thickness of any plastering is taken into account when
the brickwork is being build.
• If you use other material than bricks, install the material in accordance with
the instructions of the supplier of the material.
1. Identify the positions where the inlet grates and the outlet grates must be put. Refer
to chapter
2.8
and refer to the preparation manual.
Note:
Step 2, 3 and 4 are only applicable for the built-in appliance. For the appliance
attached on the wall support frame continue with step 6.
2. Identify the position for the operating unit.
3. Build the fireplace to just above the intended position of the operating unit
4. install the operating unit with the gas regulator block, receiver and light module. Do
the procedure given in chapter
4.8
.
5. Build the brickwork around the appliance up to the upper frame.
6. If applicable, connect the mantel iron with the back wall with the draw bars. Refer to
chapter
4.9
for the installation procedure.
a) Put ceramic felt on the top of the mantel iron. Brickwork can be built on top of
the ceramic felt.
7. Build the fireplace around the appliance.
8. Install the grates on the inlet openings and the outlet openings.
9. Make sure the overpressure hatches are placed correct. Refer to chapter
5.1
for
instructions.
4.8 Put the operating unit in position
Caution:
• Do not twist the flexible pipes to the gas regulator block. Make sure that
there is no stress on the flexible pipes and the gas regulator block.
•Make sure that you do not damage the pipes.
• Make sure that the compression fittings do not come loose.
Installation
Large 3
33
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires ROOM DIVIDER LARGE 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires ROOM DIVIDER LARGE 3 in the language / languages: English as an attachment in your email.

The manual is 3.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires ROOM DIVIDER LARGE 3

Bellfires ROOM DIVIDER LARGE 3 Additional guide - English - 96 pages

Bellfires ROOM DIVIDER LARGE 3 User Manual - English - 36 pages

Bellfires ROOM DIVIDER LARGE 3 Additional guide - German - 100 pages

Bellfires ROOM DIVIDER LARGE 3 Installation Guide - German - 84 pages

Bellfires ROOM DIVIDER LARGE 3 User Manual - German - 40 pages

Bellfires ROOM DIVIDER LARGE 3 Additional guide - Dutch - 100 pages

Bellfires ROOM DIVIDER LARGE 3 Installation Guide - Dutch - 84 pages

Bellfires ROOM DIVIDER LARGE 3 User Manual - Dutch - 36 pages

Bellfires ROOM DIVIDER LARGE 3 Additional guide - French - 100 pages

Bellfires ROOM DIVIDER LARGE 3 Installation Guide - French - 76 pages

Bellfires ROOM DIVIDER LARGE 3 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info