768181

Bellelli Tiziano Isofix Manual

14
Zoom out
Zoom in
Previous page
1/38
Next page
Fitting the child seat with Isofix and the
support leg
Warning: the child seat can only be fitted with
the Isofix system in the positions shown in the
vehicle’s user manual. Before installation, check
the vehicle’s user manual to see whether its
various seats are compatible with the size and
anchoring systems of your child restraint.
Warning: before installation, ensure that your
car is compatible with the Isofix system. See the
paragraph “List of compatible vehicles”.
Fitting
Line up the seat protectors with the Isofix
attachment points. The protectors make the
fitting procedure easier and protect the vehicle’s
seats (fig. 10).
Swing the support leg (C) out forwards until it is
completely open (fig. 11).
Press the button (B) and push the Isofix system
all the way back in order to fully extract the Isofix
connectors (Q) (fig. 12).
Ensure that the indicators on the levers (R) are
red. If this is not the case, move the levers (R)
as shown in figure 13 until they switch to red.
Put the child seat on the seat of the vehicle.
Insert the connectors (Q) in the two protectors.
Push the child seat back to fasten the two Isofix
connectors to the attachment points in the car
(fig. 14). You will hear two distinct clicks.
Warning: ensure that the indicators on the levers
(R) are green. If they are not, the child seat is
not attached properly.
Repeat the attachment procedure.
Press the button (B) and move the child seat
towards the seat of the vehicle slightly (fig. 15).
Push the child seat back until it is resting against
the backrest of the vehicle’s seat.
Warning: check once more whether the child seat
is properly secured by trying to pull and move it.
Adjusting the support leg
Press the button (F) and adjust the length of the
leg (C) so that it touches the floor of the car (fig.
16).
Check that the leg is at the right length by
ensuring that the support foot (E) is touching the
floor of the car and the child seat is resting on
the seat of the vehicle.
Make sure that the indicator (D) is green.
Ensure that the leg is properly secured: it should
not be possible to adjust its length without
pressing the button (E).
Removing the child seat
Pull the lever (R) forward to release the Isofix
connectors. When the connectors are no longer
attached, the indicators on the levers (R) turn red.
Move the child seat away from the seat of the
vehicle.
It is recommended that you put the support leg
back in the shorter position by pressing the
button (F) and pushing the leg (C) up. Swing the
support leg under the child seat so that it takes
up as little space as possible.
Fitting the child seat with the safety belt
of the vehicle
If your vehicle does not have compatible Isofix
attachment points, it is possible to secure the
child seat with the vehicle’s safety belt, using
the support leg. See the paragraph “List of
compatible vehicles”.
How to fit the child seat in a vehicle
Warning: do not use a seat in the vehicle that
is only equipped with a lap belt to secure the
child seat.
Position the child seat on the seat of the vehicle
so that it is resting fully against the seat and
backrest (fig. 17).
Warning: the safety belt positioning points are
coloured in red. Do not thread the car safety belt
through positions other than those shown.
Completely recline the child seat so as to
facilitate the passage of the car safety belt.
Pass the waist strap of the vehicle’s safety belt
between the base (S) and the child seat (N) (fig.
18).
Fasten the vehicle’s safety belt (fig. 19).
Lower the tab of the safety belt lock (P) positioned
on the back of the shell; pass the chest strap of
the vehicle’s safety belt through the safety belt
lock (fig. 20).
Warning: tighten the vehicle’s safety belt well to
eliminate any play.
Warning: check that the vehicle’s safety belt is
not twisted at any point.
Adjusting the support leg
See the “Adjusting the support leg” paragraph in
the “Fitting the child seat with the safety belt of
the vehicle” section.
How to remove the child seat
Unfasten the vehicle’s safety belt.
Lower the tab and remove the safety belt from
12
EN
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellelli Tiziano Isofix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellelli Tiziano Isofix in the language / languages: English, Dutch, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info