768177

Bellelli Maximo Manual

18
Zoom out
Zoom in
Previous page
1/78
Next page
For the versions equipped with isofix attachment points
Release the attachment points (N) by pressing the red button (Fig. 14).
Place the attachment points (N) underneath the product's seat (G).
How to position the child in the seat
Press adjuster (J) and simultaneously pull both the harness straps (E)
of the child seat (Fig. 15).
Press the red buckle button (K) to open it (Fig. 16).
Open the straps and lay them on the sides of the child seat.
Sit the child in the child seat.
Bring the two harness tongues together and insert them into the buckle
(K). A click indicates when the buckle is closed correctly (Fig. 17).
Position the padding sections (C) on the shoulders and chest of the
child, pulling them downwards (Fig. 18).
Pull the adjuster strap (H) to tighten the safety harness (E) snugly
over the child (Fig. 19).
Warning: During the journey periodically check that the child has not
freed itself from the child seat.
How to free the child from the seat
Press the adjuster (J) and simultaneously pull both the harness straps
(E) to loosen them (Fig. 20).
Press the red buckle button (K) to open it (Fig. 21).
Take off the straps and clear them from the child.
Groups 2 and 3 (from 15 to 36 kg) with backrest
Remove the child seat harness before using it for groups 2 or 3.
How to remove the car seat harness
Release both harness straps (E) from the metal yolk (O) and unthread
them from the backrest (Fig. 22).
Unthread the padding fixture plates (R) from the backrest (D) (Fig. 23).
Turn the child seat over and completely unthread the straps (E) (Fig.
24).
Pass the metal clip (K) of the buckle through the hole in the seat and
unthread the buckle (G) from the child (Fig. 25).
How to position the child in the seat
Position the child seat on the seat of the vehicle so that it is fully
supported on the seat and backrest.
For the versions equipped with isofix attachment points
Fix the isofix attachment points (N) as shown in the section How to
use the isofix attachment points.
Warning: The car seat belt routing positions are marked in red. Do not
route the car seat belt in positions other than those indicated.
Sit the child in the child seat.
Position the diagonal section of the car seat belt over the child’s chest
and pass it under the seat armrest (F) (Fig. 26).
Insert it into the belt guide (B) (Fig. 27).
Pass the lap section of the car seat belt under the two armrests of the
seat (F) (Fig. 28).
Tension the car seat belt well, check that there are no twists and that it
runs smoothly under the armrests of the child seat (F).
Close the car seat belt.
Warning: During the journey periodically check that the child has not
freed itself from the child seat.
How to free the child from the seat
Release the car seat belt, unthread it from the child seat and allow
EN
16
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellelli Maximo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellelli Maximo in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info