772314
8
Zoom out
Zoom in
Previous page
1/66
Next page
6
MOUNTING THE CHILD SEAT
Do not carry out mounting operations with the child in the seat.
Make sure you have all the components before proceeding with assembly (g. A).
Gently pull the knob (8) towards you and turn it anti-clockwise to open the clasps on the support plate.
Place the child seat on the parcel rack (g. B).
Warning: Check that the distance between the centre of gravity symbol printed on the outer sides of
the seat and the wheel axis is under 10 cm. Danger of tipping over.
Gently pull the knob (8) towards you and turn it completely clockwise to lock the clasps onto the parcel
rack (g. C).
Warning: after locking the clasps, check that the child seat cannot move back and forth on the parcel rack.
Warning: Periodically check that the clasps are tight to the parcel rack: clasps can become loose
with use.
Hook the additional safety belt (1) to the bike frame (g. D).
WARNING: the additional safety belt must always be hooked to the bike frame.
Taking the child seat off the bike
Unhook the additional safety belt (1).
Gently pull the knob (8) towards you and turn it anti-clockwise to open the clasps on the support plate.
Lift the child seat off the parcel rack.
ADJUSTING THE CHILD SEAT
Before using the seat, check to make sure that the safety belts and foot rest positions are tted to
your child’s size.
The safety belts must be positioned just above the child’s shoulders.
The child should be able to completely rest his or her feet on the foot rests.
Do not adjust the safety belts or the foot rests while the child is in the seat.
Adjusting the safety belts
Remove the belt through the hole in the backrest.
Insert the safety belt through the hole in the backrest at the desired height (g. E).
Repeat the same operation for the other safety belt.
Adjusting the foot rests.
Turn the locking lever (9) behind the foot rest upwards (g. F).
Move the foot rest (11) upwards or downwards to the desired position.
Close the locking lever (9) by pushing it downwards until you hear a click.
Repeat the same operation for the other foot rest.
FINAL CHECK
Push the bicycle for several meters by hand, checking to make sure that no moving parts touch the
child seat, that none of the safety belts stick out around the wheel, and that the bicycle brakes and
pedals still work properly.
PLACING THE CHILD IN THE SEAT
Press the button on the large central buckle (2) until you hear a click showing that the hook has been
released (g. G).
Pull upwards to extract the buckle.
Seat the child.
Pull the safety belts down over the child’s head (g. H).
Fasten the large central buckle to the opening nearest the child (g. I). Push the buckle all the way into
the opening until you hear a click.
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellelli Clamp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellelli Clamp in the language / languages: All languages as an attachment in your email.

The manual is 1.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info