Manual Bell Hitchbiker 2 (page 7 of 20) (English, French, Spanish)

773381

Zoom out

Zoom in

1/20

Using Your Rack

10. Load each bicycle so the top tube rests on the cradles.

11. Wrap each strap over frame tubes, thread through cradle loop, pull

snug and press hook-and-loop straps together. Wiggle each bike to

ensure the straps are secure. The cradle strap is designed to fit many

sizes of bicycle tubing and hold firmly regardless of temperature or

weather. Figure L and M.

12. Use a BELL cable lock (included with some models), a shock cord,

or rope to secure the frames and wheels of the bicycles to ensure

safe transport.

USING THE QUICK ACCESS TILT FEATURE

13. Remove all the bicycles from the support arms.

14. Hold the vertical mast firmly with one hand. Unfasten the quick

release retainer clip and remove the pin. Figure G.

15. Tilt the rack away from the vehicle until it reaches it’s stop. Avoid

impacting the ground with the reflective endcaps. Figure H.

16. After returning the hitch rack to its upright position, be sure that the

pin is fully inserted into the tilt channel and that the retainer clip is firmly

clipped on the pin.

USING THE LOCKING KEY CABLE

17. Wrap the cables through your bike frames and wheels, routing through

the lock loop at the base of the rack mast. Your cable is configured to

either lock back to itself when looped through the lock loop on the mast

with the sliding bayonet or to the hitch bolt as shown. Figure N and O.

IMPORTANT

Before each use, check to ensure that ALL straps and bolts are tightened

securely, and if you are using a locking cable that it is tightly wrapped and

locked completely.

English

ONM

GE H

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bell Hitchbiker 2 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1.01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bell Hitchbiker 2 Manual

Product: