Manual Bell Dashboard 300 (page 10 of 34) (English, French, Spanish)

773366

Zoom out

Zoom in

1/34

additional function modes

FREEZE FRAME MEMORY– Press the LEFT button, Freeze Frame Memory can lock

the display at the end of a ride segment and information TM, DST and AVS which will

be ashing, can be read at a later time by the RIGHT key. To release the memory, press

the LEFT key until the display digit is static again. This is particularly useful when

crossing the nish line of a time trial, since the TM cannot be stopped manually.

ODOMETER SAVE FUNCTION– The SAVE function allows you to keep the impor-

tant data of total distance (ODO) even after battery replacement. To set ODO, after

battery replacement and wheel size setting, press RIGHT button to ODO mode and

then hold LEFT button for 2 seconds until the last digit ickering. To adjust number,

press the RIGHT button and then press the LEFT button to conrm and select digit to

be input. Repeat this sequence to reach the desired odometer value. Press the LEFT

button again to return to normal ODO mode.

AUTO STOP/START– To preserve batteries, the cycle computer will automatically

switch off if the unit is left unused for over 5 to 6 minutes. Display will reappear with a

press on either button or input from the sensor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bell Dashboard 300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1.14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bell Dashboard 300 Manual

Product: