772308
4
Zoom out
Zoom in
Previous page
1/14
Next page
STEP 3 STEP 5
Remove the seat post clamp bolt from your bicycle.
Attach the U-bracket using a 8mm x 58mm Hex Bolt,
8mm Split Lock Washer and 8mm Nylock Nut.
STEP 4
Position right and left seat supports on both sides of U
bracket. Insert spacer tube and secure using a 8mm x
58mm Hex Bolt. 8mm Split Lock Washer and 8mm
Nylock Nut. Hand tighten at this time.
Assemble long lower brackets to rear stay of bicycle by
sliding vinyl paint protectors over all four brackets and
inserting the short lower bracket into the slotted end of
the long lower bracket and twisting into position. Insert
8mm x 30mm Round Hd. Sq. Neck Bolt and secure
with 8mm Split Lock Washer and 8mm Nylock Nut.
STEP 6
Remove Foot Guard, Spring Guards and Foot Guard
Fasteners from plastic sheet. Install foot guard by
wrapping it over the top of the right and left seat
supports and tucking it under the front edge of the
seat. Secure foot guard to bicycle frame by inserting
fasteners through slots in foot guard and around the
bicycle frame. If bicycle has exposed springs, wrap
spring guards around springs.
NOTE: The child carrier must be in a level position
when installed. Several adjustment holes are provided
in the U bracket which will enable you to clear all
obstructions and level the carrier. Tighten all fasteners
securely. Place plastic thread protector (item #15) onto
8mm x 58mm Hex Bolt used in Steps 3 & 4.
HARDWARE NEEDED FOR
STEP 3, 4 & 5
ITEM #20
8mm x 58mm
Hex Bolt
Steps 3 & 4
ITEM #21
8mm
Nylock Nut
Steps 3, 4 & 5
ITEM #15
Plastic Thread
Protector
Steps 3 & 4
ITEM #22
8mm
Split Lock Washer
Steps 3, 4 & 5
ITEM #19
8mm x 30mm Round
Hd. Sq. Neck Bolt
Step 5 Only
15
11
15
11
14
3
2
12
13
23
Spring Guards
Foot Guard
Plastic Sheet
Foot Guard
Fasteners
Spring Guard
Fasteners
5
Spring Guard
6
Foot Guard
Fastener
4
Foot Guard
6
Foot Guard
Fastener
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bell Cocoon 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bell Cocoon 300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info