771536
140
Zoom out
Zoom in
Previous page
1/428
Next page
13
Modo de red de 2,4GHz: selecciona los estándares inalámbricos que son compatibles con tu red.
Mixto (predeterminado)
Mantén el valor predeterminado si tienes en la red dispositivos que funcionan con los
estándares Wireless-B, Wireless-G y Wireless-N de 2,4 GHz.
Solo Wireless-B/G
Selecciona esta opción si tienes en la red dispositivos que funcionan con los estándares
Wireless-B o Wireless-G.
Solo Wireless-B
Selecciónalo si solo tienes dispositivos que funcionan con Wireless-B.
Solo Wireless-G
Selecciónalo si solo tienes dispositivos que funcionan con Wireless-G.
Solo Wireless-N
Selecciónalo si solo tienes dispositivos que funcionan con Wireless-N de 2,4 GHz.
Desactivado
Selecciónalo si no tienes en la red dispositivos que funcionan con los estándares Wireless-B,
Wireless-G y Wireless-N (2,4 GHz). Si eliges esta opción, la radio de 2,4GHz estará
desactivada.
Nota: si no estás seguro del modo que debes utilizar, mantén el valor predeterminado:
Mixto.
Nombre de red (SSID)
El Service Set Identifier (SSID) es un nombre utilizado por los dispositivos para conectarse a una red
inalámbrica. Los nombres SSID distinguen entre minúsculas y mayúsculas y no deben tener más de
32 caracteres. Los SSID predeterminados de las bandas de 2,4 GHz y 5 GHz son BelkinXXXXX y
BelkinXXXXX_5GHz respectivamente. La X representa los últimos cinco dígitos del número de serie
del router, que se ubica en la parte inferior del mismo. Si has cambiado el SSID, ambas bandas
tendrán los SSID nuevos. Puede cambiarle el nombre con la herramienta basada en navegador.
Nota: si restauras la configuración predeterminada de fábrica (presionando el botón Reset o
usando la pantalla Configuración > Administración > Pantalla de restauración del
dispositivo), el valor del nombre de red volverá a ser el predeterminado. Vuelve a cambiar el
nombre de red a su nombre original o tendrás que conectar de nuevo todos los dispositivos de
tu red inalámbrica al nuevo nombre de red.
Ancho de canal
Mantén el valor predeterminado, Auto (20 MHz o 40 MHz), para obtener el mejor rendimiento en una
red de 2,4 GHz usando dispositivos Wireless-B, Wireless-G y Wireless-N (2,4 GHz). Para una anchura
de canal de 20 MHz, selecciona Solo 20 MHz. Para obtener el mejor rendimiento en una red de 5 GHz,
mantén el valor predeterminado Auto (20, 40 o 80 MHz).
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belkin RT3200 - AX3200 DUAL-BAND GIGABIT WiFi 6 ROUTER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belkin RT3200 - AX3200 DUAL-BAND GIGABIT WiFi 6 ROUTER in the language / languages: English as an attachment in your email.

The manual is 3.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info