Manual Belkin 5 port network switch 10 100base t ethernet (page 10 of 50) (Dutch)

433841

Zoom out

Zoom in

1/50

To connect your computers to the Belkin Switch, each computer must

be equipped with a network interface card/adapter such as an

internal PCI card (for desktop computers), a PC card (for notebook

computers), or a USB Ethernet adapter (an alternative to opening up

your PC; for USB-equipped computers only). Each computer connects

to the Belkin Switch via a CAT5 networking cable. You will need one

networking cable for each PC.

1. Be sure that the power to the Belkin Switch, your modem, and

all of your PCs has been turned OFF or disconnected from the

power supply.

2. Install the Network Cards into each PC (skip this step if this

is already done).

3. Connect each computer’s installed Network Card to the Network

Switch port using a straight through unshielded twisted pair (UTP)

Ethernet Cat5e patch cable (A3L850-XX-S) or for higher

performance use Belkin Cat6 patch cables (A3L980-XX-S).

4. Plug one end of the power-supply adapter into the power

socket found at the rear of the switch and the other end into

the power outlet.

5. If the LED power indicator is green, there is power going to the

switch.

6. Turn on the rest of your computers and let them boot up. After

your computers boot up, the LAN link lights on the front of the

Belkin Switch should be ON for each port to which a computer is

attached. Verify that your computers are connected by checking

these lights.

Connecting a Simple Network

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Belkin 5 port network switch 10 100base t ethernet in the language / languages: Dutch as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Belkin 5 port network switch 10 100base t ethernet Manual

Product: