630724
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
Conversion from liquid gas to natural gas
If the appliance is to be converted from liquid gas
(LPG: G30, G31) to natural gas (NG: G20, G25):
When natural gas (NG) is used, gas is connected via a gas line
or a safety hose using a connecting piece with a screw thread
at each end.
Connection as per EN ISO 228 G
^ (TS EN ISO 228 G^ )
1. The connecting hose on the appliance must be replaced with
a natural gas adapter. First remove the safety hose, if
present, by loosening the screw connection or the fastening
clip from the appliance. Figure 1.
Attach the connecting piece (with a size 24 key) to the end of
the gas connection (with a size 22 key). Figure 2.
2. Place the new seal on the connecting piece. Make sure that
the seal is correctly seated.
3. Attach the connecting piece (with a size 24 key) to the end of
the gas connection (with a size 22 key).
4. Attach the threaded connecting piece of the gas line or safety
hose (with a size 24 key) to the connecting piece with a new
seal, and tighten it.
5. To perform a leak test, see the section entitled "Leak test".
Open the gas supply.
Notes
*G^: EN ISO 228 G^ (TS EN ISO 228 G^)
A torque spanner should be used when converting the gas
type.
Connection as per EN 10226 R
^ (TS 61-210 EN 10226 R^ )
1. The connecting hose on the appliance must be replaced with
a natural gas adapter. First remove the safety hose, if
present, from the appliance by loosening the screw coupling
or the hose clamp. Figure 1.
Attach the connecting piece (with a size 24 key) to the end of
the gas connection (with a size 22 key). Figure 2.
2. Place the new seal on the connecting piece. Make sure that
the seal is correctly seated.
3. Attach the connecting piece (with a size 24 key) to the end of
the gas connection (with a size 22 key).
4. Attach the threaded connecting piece of the gas line or safety
hose (with a size 24 key) to the connecting piece and tighten
it.
5. To perform a leak test, see the section entitled "Leak test".
Open the gas supply.
Notes
*R^: EN 10226 R^ (TS 61-210 EN 10226 R^)
A torque spanner should be used when converting the gas
type.
76(1,62*A
(1,62*A
6:

6:

6:

6:

6:

*ê
1***

1P
5A
76(1
(15A
6:

6:

6:

6:

6:

5ê
1***

1P
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belion GK604ZG20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belion GK604ZG20 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Belion GK604ZG20

Belion GK604ZG20 User Manual - English, Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info