630724
4
Zoom out
Zoom in
Previous page
1/28
Next page
4
Preparing the kitchen units
Make a cut-out in the work surface with the dimensions
indicated.
If the hob is an electric or combination hob (gas and electric)
and there is no oven underneath, install an intermediate floor
made out of incombustible material (e.g. metal or plywood) 10
mm under the floor of the hob. This prevents access to the
bottom part of the hob. If the hob is a gas hob, it is
recommended to install the intermediate floor at the same
distance to the hob.
For work surfaces made of wood, seal the cutting surfaces with
special glue in order to protect them from moisture.
Installation of appliance
Remove the pan support, handles, burner cap and burner
heads.
Turn the appliance over carefully and place it on a soft cloth.
Make sure that the ignition parts are not damaged.
Stick the seal from the accessory kit provided to the bottom
edge of the hob.
To secure the appliance to the fitted unit:
1. Screw the installation screws from the accessory kit provided
into the lower hob plate.
Caution!
When fixing the installation screws in place, ensure that the
clips are firmly seated.
2. Insert and centre the hob in the cut-out of the work surface.
Keep pressing the edges down until the entire edge is resting
on the surface.
Setting up the appliance
The appliance must be set up directly on the kitchen floor
and in line with the specified dimensions. The appliance must
not be set up on any other object.
The distance between the top edge of the oven and the
bottom edge of the extractor hood must meet the
requirements of the extractor hood manufacturer.
Ensure that the appliance is not moved again after set up.
The distance from the high output burner or wok burner to
the fronts of adjacent units must be at least 50 mm.
The underside of the appliance heats up during operation.
Therefore, a guard plate must be fixed onto the underside of
the appliance.


PLQ

PLQ

PLQ



[
PLQ

PD[

4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belion GK604ZG20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belion GK604ZG20 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Belion GK604ZG20

Belion GK604ZG20 User Manual - English, Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info