777831
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Assembling the 9 Inch Desk Fan
Assembling the Desk Fan
STEP 1: Remove the plastic rear grill locking nut by twisting it in an
anticlockwise direction.
STEP 2: Place the rear grill over the motor assembly pin so that it is aligned
with the four plastic pins.
STEP 3: Add the grill locking nut, twisting it in a clockwise direction to secure
the rear grill into position.
STEP 4: Place the fan blade unit onto the motor assembly and push until it is
locked into position.
STEP 5: Open the clips around the outer edge of the front grill and position it
onto the rear grill. Fasten the clips around the outer edge of the front grill to
lock the grills into position, so that the blade and motor unit are protected.
STEP 6: Insert the grill screw through the hole at the bottom of the front and
rear grill, then place the nut onto the grill screw and tighten it in a clockwise
direction to secure the grills together.
Note: Do not overtighten the rear grill locking nut.
Instructions for Use
Before connecting to the mains power supply, place the assembled desk fan
onto a at, stable surface, allowing for sufcient distance between the desk fan
and any objects that could get damaged or caught in the rotating fan blades.
Using the 9 Inch Desk Fan
STEP 1: Plug in and switch on the desk fan at the mains power supply.
STEP 2: To turn on the desk fan, select the desired cooling speed by pressing
‘1’or ‘2’. Speed setting ‘1’ is the lowest cooling speed setting; ‘2’ is highest
cooling speed setting.
STEP 3: To tilt the fan head, position as desired. The locking mechanism will
hold the head in the set orientation.
STEP 4: Activate the oscillation function by pushing the oscillation switch; the
desk fan will begin to oscillate. To stop the desk fan from oscillating, pull up the
oscillation switch.
STEP 5: Turn off the desk fan by pressing ‘0’.
Caution: Do not cover the fan head.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray EH2658 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray EH2658 in the language / languages: English as an attachment in your email.

The manual is 9.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info