777782
6
Zoom out
Zoom in
Previous page
1/10
Next page
THE SCIENCE
BEHIND HEAT
Instructions for Use
Before First Use
When using this PTC Tower Heater for the first time, a slight odour may be emitted. This is
normal and will subside after a few uses.
Place the PTC Heater on a flat, stable, heat-resistant in an open space, at least 120 cm away
from furniture, walls, objects, curtains or any other flammable materials.
Check that the air intake is not blocked.
Using the PTC Heater
Position the PTC Tower Heater on a flat, stable, heat-resistant surface, at least 120 cm from
walls, objects and furniture.
Plug the PTC Tower Heater into the mains power supply.
Turn on the ‘On/Off’ switch on the base of the PTC Tower Heater, then press the ‘On/Off’
button on the control panel.
Press the ‘Fan’ button to operate the fan system. The PTC Tower Heater will blow out cold air.
Select the desired heat setting using the heat setting switches. For a low heat setting, press one of
the heat setting switches. For a high heat setting, press down both of the heat setting switches.
To use the oscillation function, press the ‘Oscillation’ button.
To turn off the PTC Tower Heater, switch off the ‘Fan’ button, both heat setting switches and
the ‘On/Off’ button on the control panel. Switch off the ‘On/Off’ switch at the base of the PTC
Tower Heater and then unplug the heater from the mains power supply.
Thermal Safety Cut-Out
This PTC Tower Heater is fitted with a thermal safety cut-out system, built-in to prevent it
overheating. Should the PTC Tower Heater start to overheat, the thermal safety cut-out system
will automatically operate and the PTC Tower Heater will switch off. The PTC Tower Heater
will only resume normal operation when it has been manually switched back on.
When the thermal safety cut-out activates, the PTC Tower Heater should be left to cool for
approximately 30 minutes before using again.
Before turning the PTC Tower Heater back on, check that there is nothing obstructing the
airflow or blocking the air intake and that the PTC Tower Heater has been placed at least 120
cm away from walls, objects and furniture.
EH0933 PTC Tower Heater 7
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray EH0933 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray EH0933 in the language / languages: English as an attachment in your email.

The manual is 0.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info