777094
7
Zoom out
Zoom in
Previous page
1/12
Next page
THE SCIENCE
BEHIND CLEAN BEL0537 – Window Cleaning Vacuum 7
Instructions for Use
Before First Use
Before using the window vacuum for the first time, wipe it with a soft, damp cloth and dry thoroughly.
Do not immerse the window vacuum in water or any other liquid.
Ensure that the squeegee head is free from any debris (e.g. hair), as this could ruin the streak-free
finish or damage the surface of the glass.
Charging the Window Cleaning Vacuum
Before first use, the window vacuum must be charged for approx. 3–4 hours. Subsequent
charging times will take approx. 2–3 hours.
STEP 1: Connect the lead from the mains power adaptor to the charging port on the
window vacuum.
STEP 2: Plug the mains power adaptor into the mains power supply; the indicator light will flash
to confirm that the battery is charging. Once the battery is fully charged, the indicator light will
illuminate fully.
Note: Whilst charging, the window vacuum may become warm.
Caution: Exercise caution when charging the window vacuum; ensure
that it is on a dry, stable surface away from other appliances.
Warning: Do not use any mains power adaptor other than that
supplied, as this could cause a hazard.
Assembling the Window Cleaning Vacuum
Attach the squeegee head by inserting it onto the top of the window vacuum main body; the
arrow indicators must be aligned. Twist the squeegee head in a clockwise direction to secure it
into position.
Assembling the Spray Bottle
STEP 1: Attach the wiper attachment to the top of the spray nozzle head.
STEP 2: Feed the suction hose through the nozzle clip; the spray nozzle head should face away
from the lip.
STEP 3: Gently press in the lugs on the bottom of the wiper attachment and insert the
assembled wiper attachment/spray nozzle head into the nozzle clip, until it locks into position.
STEP 4: Add the spray head to the top of the spray bottle and twist it in a clockwise direction
to secure it into position.
STEP 5: Pull the microfibre wipe pad over the wiper attachment, allowing the elastic edges to
hold it into position. Secure it using the hook and loop tape.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray BEL0537 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray BEL0537 in the language / languages: English as an attachment in your email.

The manual is 3.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info