777020

Beldray BEL0207 Manual

5
Zoom out
Zoom in
Previous page
1/10
Next page
THE SCIENCE
BEHIND CLEAN
Instructions for Use
Ensure that the Steam Station is unplugged from the mains power supply.
Remove the water tank from the Steam Station main body by grasping the water fill entrance
and gently but firmly pulling it out. Fill the water tank with tap water up to the Max. level marked
on the front of the tank. Once full, replace the water tank back onto the Steam Station main
body until it clicks into position.
Connect the Steam Station to the mains power supply.
To begin using the Steam Station, press the ‘On/Off’ switch. The power indicator light will flash
to indicate that the boiler is heating up.
Select the temperature of the Steam Station by turning the temperature control dial on the iron
to the desired heat setting.
When the Steam Station has reached the correct temperature, the power indicator light will
stop flashing and will remain lit; when the heat ready indicator light turns off, the Steam Station is
ready for use.
If the low water level indicator light flashes and an audible noise is emitted, the water level in the
tank is too low and the water tank will need refilling according to the instructions provided.
Note: It is possible to fill the water tank whilst it is still attached to the Steam Station main unit
by directly pouring water into the water fill entrance.
Note: This Steam Station is designed for use with tap water. If the water in your area is
particularly hard, please use demineralised water to protect the internal parts of the Steam
Station from limescale build-up.
Note: If the temperature required for a particular garment is not specified, it is recommended
to iron at the lowest heat setting and then increase if necessary, in order to avoid damage to
the material.
Tip: Before use, separate the clothes to be ironed by ironing temperature, starting at the coolest
setting, as the iron will heat up faster than it will cool down.
Steam Ironing
When steam ironing for the first time, it is recommended to iron a plain cloth to test that the
iron is working at the correct temperature.
To use the steam setting, press the trigger/steam button on the underside of the iron handle.
This will provide steam up until the button is released. The continuous steam jet button can be
locked down in order to provide continuous steam by sliding the steam button lock towards the
rear of the iron.
Vertical Steam Ironing
Vertical steam ironing is especially useful when removing creases from hanging fabrics, such as
curtains, wall hangings and certain clothes.
To use the vertical steam function, hold the iron approximately 1–2 cm away from the fabric to
be steamed, and then press and hold the steam button on the underside of the iron handle and
direct the iron soleplate at the area to be steamed.
BEL0207 Steam Station 5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray BEL0207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray BEL0207 in the language / languages: English as an attachment in your email.

The manual is 0.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info