778021
5
Zoom out
Zoom in
Previous page
1/14
Next page
5
Instructions for Use
Before First Use
STEP 1: Check that the iron is unplugged from the mains power supply.
STEP 2: Wipe the exterior surface of the iron with a soft, damp cloth and dry thoroughly.
STEP 3: To remove any impurities that may have occurred during the manufacturing
process, it is best to use the iron on an old piece of cloth, making sure that it is on the
highest temperature setting suitable for the material. Plug in and switch on the iron at
the mains power supply, place the iron onto the cloth and then push the steam burst
button 2–3 times, waiting approx. 5 seconds in-between each burst; this will remove any
impurities from the ceramic soleplate.
Do not immerse the iron in water or any other liquid.
Note: When using the iron for the rst time, a slight odour and
a small amount of smoke may be emitted. This is normal and
will soon subside. Allow for sufcient ventilation around the iron
when it is in use.
Filling the Water Tank
STEP 1: Switch off and unplug the iron from the mains power supply.
STEP 2: Check that the steam control dial is set to the off position.
STEP 3: Set down the iron onto the heel rest and open the water tank cap.
STEP 4: Fill the measuring jug with water. Carefully pour the contents of the measuring
jug into the water tank. Do not ll the water past the max. ll mark.
STEP 5: Close the water tank cap.
Caution: Do not ll the water tank past the max. ll mark; it is
best to check the water level when the iron is on the heel rest.
Do not immerse the appliance in water or any other liquid.
Warning: Never add descaling, aromatic, alcoholic or
detergent products to the water tank, as this could cause
damage to the iron or injury to the user.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray BEL01213 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray BEL01213 in the language / languages: English as an attachment in your email.

The manual is 2.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info