776960
21
Zoom out
Zoom in
Previous page
1/25
Next page
BEL0050 Sewing Machine
22
Do’s and Don’ts
Do not use this machine with a bent or broken needle.
Do not make any alterations to settings or rewind bobbins without first switching off the appliance
and disconnecting the DC adaptor.
Keep hands clear of the needle whilst sewing.
Do not force material through the appliance; allow it to move at the pace of the machine.
Ensure you have selected the correct tension.
Troubleshooting
Symptom Possible Cause Corrective Action
The sewing machine does not
work.
The machine is not plugged
in.
The main power switch is
turned off.
The bobbin-winder shaft is
pushed to the right.
You have not used the foot
controller properly.
Plug the machine in.
Turn on the main power
switch.
Move the bobbin-winder
shaft to the left.
Use the foot controller
properly.
The needle breaks. The needle is not fitted
properly.
The needle clamp screw is
loose.
The needle is bent or blunt.
You have not used the right
combination of fabric and
thread.
The upper thread tension is
too tight.
You are pulling the fabric too
much.
You have not fitted the spool
properly.
Fit the needle properly.
Firmly tighten the screw.
Replace the needle.
Choose a thread and needle
that are appropriate for the
type of fabric.
Loosen the upper thread
tension.
Lightly guide the fabric.
Fit the spool properly.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray BEL0051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray BEL0051 in the language / languages: English as an attachment in your email.

The manual is 3.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info