776960
17
Zoom out
Zoom in
Previous page
1/25
Next page
15. After sewing has been completed, cut the thread(s) off using the cutter (21) mounted on the
left hand side of the machine by looping over the cutter and pulling down.
Reverse Sewing
Reverse sewing can be used for back tacking and reinforcing seams.
To sew in reverse, push the reverse sewing lever (2) down and hold it in position while you
press the foot controller (16). To sew forwards, release the reverse sewing lever.
Accessory Compartment
Use the accessory compartment (24) mounted at the side of the appliance to store bobbins,
spare needles or the needle threading tool.
Straight Stitching
Stitch Name Pattern
Straight stitch 1 2 3
Starting Sewing
1. Turn the pattern selection dial to choose the stitch number you want. You also need to set
the pattern selection dial to the Straight Stitch or Triple Stretch Stitch.
2. Raise the needle to its highest position and lift the presser foot lever.
3. Pull the upper thread through the toes of the presser foot.
4. Put the fabric under the presser foot and position the needle 1cm (3/8 inch) from the edge of
the fabric.
5. Lower the presser foot.
BEL0050 Sewing Machine
18
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray BEL0051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray BEL0051 in the language / languages: English as an attachment in your email.

The manual is 3.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info