776954
4
Zoom out
Zoom in
Previous page
1/7
Next page
THE SCIENCE
BEHIND HEAT
Instructions for Use
Operating the Fire
Plug the fire into the mains power supply and switch on if applicable.
Do not use any form of adaptor, extension lead or timer.
Press switch 1 to operate the flame effect and to turn the fan on without the heating function.
For a low level heating, press switch 2 for the 1000W setting.
For full heating turn on switches 2 and 3 for the 2000W setting.
Adjust the thermostat to finely regulate the temperature; turn it clockwise to increase the heat
output and anticlockwise to reduce it.
To vary the brightness of the flame effect, rotate the flame brightness dial clockwise to increase
the brightness and anticlockwise to lower the brightness level.
Thermostat Instructions
The sensitive hot air control (thermostat) will constantly maintain a pre-programmed
temperature due to its automatic operation.
Turn the temperature adjustment dial switch to the right, towards the maximum level.
Leave the switch in this position until the room reaches the desired temperature.
Bulb Replacement
This appliance is supplied with two 40 watt bulbs (E-12). When they require replacing, loosen
the two screws on the panel at the back of the fire.
Remove the panel and unscrew the bulbs.
Caution: There may be sharp edges; exercise extreme caution to avoid injury.
Always replace the bulbs with identical ones of the same wattage.
To reassemble, proceed in the reverse order.
Cleaning and Maintenance
Before attempting any cleaning or maintenance, unplug the fire from the mains power supply and
allow it to cool fully.
Clean the fire with a soft, damp, lint-free cloth and dry thoroughly.
Do not immerse the fire in water or any other liquid.
Do not use harsh or abrasive detergents or scourers.
Technical Specification
Supply: 220-240V~50Hz
Power: 2000W
BA488430HSMFOB Large Electric Stove with Flame Effect 5
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beldray BA488430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beldray BA488430 in the language / languages: English as an attachment in your email.

The manual is 0.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info