757492
20
Zoom out
Zoom in
Previous page
1/83
Next page
20 / EN Washing Machine / User’s Manual
Press the Temperature Adjustment button to change the temperature. Temperature will decrease gradually.
CNo change can be made in programmes where temperature adjustment is not allowed.
You can also change the temperature after the washing cycle has started. This can be done if the washing
steps allow it. If they don’t permit it, you can’t do it.
CIf you go to the washing option and press the Temperature Adjustment button again, the maximum temperature
recommended for the selected programme will be displayed. To decrease the temperature, press the Temperature
Adjustment button again.
4.3.7 Spin speed selection
-
-
-
-
-
-
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the Spin Speed indicator.
CIt is possible that the recommended spin speed is not the highest value that can be selected for the relevant programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.
If you are not going to unload your clothes immediately after the programme ends, you can use the Rinse
Hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine.
This function holds the laundry in the final rinsing water.
If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed.
- Press Start/Pause/Cancel. Programme will resume. The machine will drain the water and spin the clothes.
If you want to drain the water at the end of the programme without spinning, you can use the No Spin function.
CNo change can be made in programmes where spin speed is not allowed.
If the washing steps permit, you can change the spin speed after the washing cycle has started. If they don’t
permit it, you can’t do it.
Rinse hold
I
f you are not going to unload your clothes immediately after the programme ends, you can use rinse hold
function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there
is no water in the machine. Press Start/Pause button after this process if you want to drain the water without
spinning your laundry. Programme will resume where it left off, drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause button.
Programme will resume. Water will be drained, laundry will be spun and the programme will end.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTV8761BSCDOS1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTV8761BSCDOS1 in the language / languages: English, German as an attachment in your email.

The manual is 7,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO WTV8761BSCDOS1

BEKO WTV8761BSCDOS1 User Manual - Dutch, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info