676624

BEKO WTV 7732 XW0 Manual

36
Zoom out
Zoom in
Previous page
1/44
Next page
36 / EN
Washing Machine / User’s Manual
C
If no programme is started or no button is pressed within
1 minute during programme selection process, the
machine will switch to Pause mode and the illumination
levelofthetemperature,speedandloadingdoorindicator
lights will dim. Other indicator lights and indicators will
turn off. Once the Programme Selection knob is rotated or
any button is pressed, indicator lights and indicators will
turn on again.
4.12 Child Lock
UseChildLockfunctiontopreventchildrenfromtampering
withthemachine.Thusyoucanavoidanychangesina
running programme.
C
IftheProgrammeSelectionknobisturnedwhentheChild
Lockisactive,"Con"appearsonthedisplay.TheChild
Lock does not allow any change in the programmes and
theselectedtemperature,speedandauxiliaryfunctions.
Evenifanotherprogrammeisselectedwiththe
ProgrammeSelectionknobwhiletheChildLockisactive,
previouslyselectedprogrammewillcontinuerunning.
To activate the Child Lock:
1.and2.AuxiliaryFunctionbuttonsarepressedandheldfor
3seconds.Thelightsonthe1
st
and 2
nd
AuxiliaryFunction
buttonswillflash,and"C03","C02","C01"willappearon
thedisplayrespectivelywhileyoukeepthebuttonspressed
for3seconds.Then,"Con"willappearonthedisplay
indicatingthattheChildLockisactivated.Ifyoupressany
buttonorturntheProgrammeSelectionknobwhentheChild
Lockisactive,samephrasewillappearonthedisplay.The
lightsonthe1stand2ndauxiliaryfunctionbuttonsthatare
usedtodeactivatetheChildLockwillblink3times.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliaryfunctionbuttonsfor3
secondswhileanyprogrammeisrunning.Thelightsonthe
1
st
and 2
nd
AuxiliaryFunctionbuttonswillflash,and"C03",
"C02","C01"willappearonthedisplayrespectivelywhile
youkeepthebuttonspressedfor3seconds.Then,"COFF"
willappearonthedisplayindicatingthattheChildLockis
deactivated.
C
Inadditiontothemethodabove,todeactivatetheChild
Lock, switch the Programme Selection knob to On /
Off position when no programme is running, and select
another programme.
ChildLockisnotdeactivatedafterpowerfailuresor
when the machine is unplugged.
4.13 Progress of programme
Progress of a running programme can be followed from the
ProgrammeFollow-upindicator.Atthebeginningofevery
programmestep,therelevantindicatorlightwillturnonand
light of the completed step will turn off.
Youcanchangetheauxiliaryfunctions,speedand
temperature settings without stopping the programme flow
whiletheprogrammeisrunning.Todothis,thechange
you are going to make must be in a step after the running
programmestep.Ifthechangeisnotcompatible,relevant
lights will flash for 3 times.
C
If the machine does not pass to the spinning step, Rinse
Holdfunctionmightbeactiveortheautomaticunbalanced
loaddetectionsystemmightbeactivatedduetothe
unbalanced distribution of the laundry in the machine.
4.14 Loading door lock
Thereisalockingsystemontheloadingdoorofthe
machinethatpreventsopeningofthedoorincaseswhen
thewaterlevelisunsuitable.
Loading door light will start flashing when the machine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminates steadily within 1-2 minutes and the loading door
can be opened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe
loading door cannot be opened. If you are obliged to open
the Loading Door while the Loading Door light is off, you
havetocancelthecurrentprogramme;see"Cancelingthe
programme".
4.15 Changing the selections after programme
has started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine to
pausemodewhileaprogrammeisrunning.Thelightof
the step which the machine is in starts flashing in the
Programme Follow-up indicator to show that the machine
has been switched to the pause mode.
Also, when the loading door is ready to be opened, Loading
Door light will also illuminate continuously in addition to the
programme step light.
Changing the auxiliary function, speed and
temperature
Depending on the step the programme has reached, you
cancanceloractivatetheauxiliaryfunctions;see,"Auxiliary
function selection".
You may also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
C
Ifnochangeisallowed,therelevantlightwillflashfor3
times.
Adding or taking out laundry
1. Press Start / Pause button to switch the machine to
pausemode.Theprogrammefollow-uplightofthe
relevantstepduringwhichthemachinewasswitchedinto
the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4.ClosetheLoadingDoor.
5.Makechangesinauxiliaryfunctions,temperatureand
speed settings if necessary.
6.PressStart/Pausebuttontostartthemachine.
4.16 Cancelling the programme
Tocanceltheprogramme,turntheProgrammeSelection
knobtoselectanotherprogramme.Previousprogramme
willbecancelled.End/Cancellightwillflashcontinuouslyto
notify that the programme has been canceled.
Pumpfunctionisactivatedfor1-2minutesregardlessofthe
programme step, and whether there is water in the machine
or not. After this period, your machine will be ready to start
with the first step of the new programme.
C
Depending on the step where the programme was
canceledin,youmayhavetoputdetergentandsoftener
againfortheprogrammeyouhaveselectedanew.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTV 7732 XW0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTV 7732 XW0 in the language / languages: English, German as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info