758318
28
Zoom out
Zoom in
Previous page
1/44
Next page
28 / EN
Washng Machne / User Manual
3. Set the desired time by pressing the Delayed Start button. When the button is pressed
once, 3 hours delayed start is selected. When the same button is pressed again, 6 hours
delay is selected, and when it is pressed for the third time, 9 hours delayed start is selected.
If you press the Delayed Start button once again, Delayed Start function will be cancelled.
4. Press Start / Pause button. Previous delayed start time light turns off and next delayed
start time light turns on after every 3 hours.
5. At the end of the countdown, all delayed start lights will turn off and the selected
programme will start.
C
You can switch the machine to pause mode and add laundry during the delayed start period.
Changing the delayed start period
If you want to change the time during countdown, you will need to cancel the programme
and set the delay time again.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme immediately:
1. Turn the Programme Selection knob to any programme. Thus, Delayed Start function will
be cancelled. The End/Cancel light flashes continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.
4.6.10 Startng the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
4.6.11 Chld Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you
can avoid any changes in a running programme.
C
If the Programme Selection knob is rotated when the child lock is active, "Child Lock Enabled
LED" will flash 3 times. The Child Lock does not allow any change in the programmes or the
selected speed.
Even if another programme is selected with the Programme Selection knob while the Child
Lock is active, previously selected programme will continue running.
When the Child Lock is active and the machine is running, you can switch the machine to
Pause mode without deactivating the Child Lock by turning the Programme Selection knob to
On / Off position. When you turn the Programme Selection knob afterwards, the programme
will resume.
To activate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds. While you are holding for
3 seconds, the "Child Lock Enabled LED" will flash. You can release the buttons when the
LEDs become permanently on.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTL82051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTL82051 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info