758326
30
Zoom out
Zoom in
Previous page
1/44
Next page
30 / EN
Washng Machne / User Manual
Adding or taking out laundry
You can load/unload laundry when a programme is running if the water level is appropriate
to open the door. To do this:
1. Press Start / Pause button to switch the machine to pause mode. The programme
follow-up light of the relevant step during which the machine was switched into the
pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in speed settings, if necessary.
6. Press Start / Pause button to start the machine.
4.6.15 Cancellng the programme
To cancel the programme, turn the Programme Selection knob to select another
programme. Previous programme will be cancelled. End / Cancel light will flash
continuously to notify that the programme has been cancelled.
Your machine will end the programme when you turn the Programme Selection knob;
however, it does not drain the water inside. When you select and start a new programme,
the newly selected programme will start depending on the step the previous programme
was cancelled in. For example, it may take in additional water or continue to wash with the
water inside.
C
Some programmes may start by discharging the water inside the machine. Depending on the
step where the programme was cancelled in, you may have to put detergent and softener
again for the programme you have selected anew.
4.6.16 End of programme
When the programme ends, "End" LED becomes on at the Programme Follow-up indicator.
1. Wait until the "Door Lock Enabled LED" goes off completely.
2. To switch off the machine, turn the Programme Selection Knob to On/Off position.
3. Take out your laundry and close the loading door. Your machine is ready for the next
washing cycle.
4.6.17 Your machne features "Pause Mode".
After you switch on your machine with the programme selection button (by switching the
button to a different position than the On/Off position), if no programme is started or no
other procedure is performed in the selection step or no action is taken within approx. 2
minutes after the selected programme ends, your machine will switch to energy saving
mode automatically. The brightness of the indicator lights will decrease. Also, if your
product has a display that shows programme time, this display will be completely turned
off. If you turn the Programme Selection knob or touch any button, lights and display will
switch back to previous condition. The selections which you make when exiting from the
energy efficiency may change. Please check the correctness of your selections before
starting the programme. If necessary, please make your settings again. This is not an error.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTL72051S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTL72051S in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info