758327

BEKO WTL64051 Manual

38
Zoom out
Zoom in
Previous page
1/44
Next page
38 / EN
Washng Machne / User Manual
Problem Reason Soluton
Detergent residue in the
detergent drawer. (**)
Detergent s put n wet drawer. • Dry the detergent drawer before
puttng n detergent.
Detergent has gotten damp. • Keep detergents closed n an
envronment free of humdty and
do not expose them to excessve
temperatures.
Water pressure s low. • Check the water pressure.
The detergent n the man wash compartment got
wet whle takng n the prewash water. Holes of
the detergent compartment are blocked.
• Check the holes and clean f they are
clogged.
There s a problem wth the detergent drawer
valves.
• Call the Authorsed Servce Agent.
Detergent mght be mxed wth the softener. • Do not mx the softener wth
detergent. Wash and clean the
dspenser wth hot water.
Regular drum cleanng s not appled. • Clean the drum regularly. For ths,
please see 4.7.2.
Too much foam forms in the
machine. (**)
Improper detergents for the washng machne are
beng used.
• Use detergents approprate for the
washng machne.
Excessve amount of detergent s used. • Use only suffcent amount of
detergent.
Detergent was stored under mproper condtons. • Store detergent n a closed and dry
locaton. Do not store n excessvely
hot places.
Some meshed laundry such as tulle may foam too
much because of ther texture.
• Use smaller amounts of detergent for
ths type of tem.
Detergent s put n the wrong compartment. • Put the detergent n the correct
compartment.
Softener s beng taken early. • There may be problem n the valves
or n the detergent dspenser. Call the
Authorsed Servce Agent.
Foam is overflowing from
the detergent drawer.
Too much detergent s used. • Mx 1 tablespoonful softener and
½ l water and pour nto the man
wash compartment of the detergent
drawer.
• Put detergent nto the machne
sutable for the programmes and
maxmum loads ndcated n the
“Programme and consumpton table”.
When you use addtonal chemcals
(stan removers, bleachs and etc),
reduce the amount of detergent.
Laundry remains wet at the
end of the programme. (*)
Excessve foam mght have occurred and
automatc foam absorpton system mght have
been actvated due to too much detergent usage.
• Use recommended amount of
detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent
any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
ACAUTION:
If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional
product yourself.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTL64051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTL64051 in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info