Manual BEKO WMY 71423 LMB3 (page 70 of 75) (English, German, Dutch, French)

579385

Zoom out

Zoom in

1/75

70 / EN

Washing Machine / User’s Manual

4.10 Auxiliary function selection

Select the required auxiliary functions before starting

the program. Furthermore, you may also select or

cancel auxiliary functions that are suitable to the running

programme without pressing the Start / Pause button when

the machine is operating. For this, the machine must be in

a step before the auxiliary function you are going to select

or cancel.

If the auxiliary function cannot be selected or canceled, light

of the relevant auxiliary function will blink 3 times to warn

the user.

Some functions cannot be selected together. For example,

Prewash and Quick Wash.

If a second auxiliary function conflicting with the first

one is selected before starting the machine, the function

selected first will be cancelled and the second auxiliary

function selection will remain active. For example, if you

want to select Quick Wash after you have selected the

Prewash, Prewash will be cancelled and Quick Wash will

remain active.

Auxiliary function that is not compatible with the program

cannot be selected. (See "Programme and consumption

table")

Auxiliary Function buttons may vary according to the

model of the machine.

• Voorwas (Prewash)

A Prewash is only worthwhile for heavily soiled laundry. Not

using the Prewash will save energy, water, detergent and

time.

Prewash without detergent is recommended for tulle

and curtains.

• Express Wassen (Quick Wash)

This function can be used in Cottons and Synthetics

programmes. It decreases the washing times for lightly

soiled laundries and also the number of rinsing steps.

When you select this function, load your machine

with half of the maximum laundry specified in the

programme table.

• Extra Spoelen (Rinse Plus)

This function enables the machine to make another rinsing

in addition to the one already made after the main wash.

Thus, the risk for sensitive skins (babies, allergic skins, etc.)

to be effected by the minimal detergent remnants on the

laundry can be reduced.

• Anti-Creasing

This function creases the clothes lesser when they are being

washed. Drum movement is reduced and spin speed is

limited to prevent creasing. In addition, washing is done with

a higher water level.

• Rinse Hold

If you are not going to unload your clothes immediately after

the programme completes, you can use rinse hold function

to keep your laundry in the final rinsing water in order to

prevent them from getting wrinkled when there is no water

in the machine. Press Start / Pause button after this process

if you want to drain the water without spinning your laundry.

Programme will resume and complete after draining the

water.

If you want to spin the laundry held in water, adjust the Spin

Speed and press Start / Pause button.

Program resumes. Water is drained, laundry is spun and the

programme is completed.

• Pet hair removal

This function helps to remove pet hair that remain on your

garments more effectively.

When you select this function, Prewash and Extra Rinse

steps are added to the normal programme. Thus, washing

is performed with more water (30%) and the pet hair is

removed more effectively.

WARNING: Never wash your pets in the washing

machine.

Delayed Start (In some models only)

With the Delayed Start function the startup of the

programme may be delayed up to 3, 6 or 9 hours.

Do not use liquid detergents when you set Delayed Start!

There is the risk of staining of the clothes.

Open the loading door, place the laundry and put detergent,

etc. Select the washing programme, temperature, spin

speed and, if required, the auxiliary functions. Set the

desired time by pressing the Delayed Start button. When the

button is pressed once, 3 hours delayed start is selected.

When the same button is pressed again, 6 hours delay is

selected, and when it is pressed for the third time, 9 hours

delayed start is selected. If you press the Delayed Start

button once again, Delayed Start function will be canceled.

Press Start / Pause button. Previous delayed start time light

turns off and next delayed start time light turns on after

every 3 hours. At the end of the countdown, all delayed start

lights will turn off and the selected programme will start.

Additional laundry may be loaded during the delayed

start period.

Changing the Delayed Start period

Press Delayed Start button. Every time the button is pressed,

the period will change in 3-hour increments and the light of

the selected delayed start time will turn on.

Canceling the Delayed Start function

If you want to cancel the delayed start countdown and start

the programme immediately:

Set the Delayed Start period to zero (all delayed start period

lights will turn off) or turn the Programme Selection knob

to any programme. Thus, Delayed Start function will be

canceled. The End/Cancel light flashes continuously. Then,

select the programme you want to run again. Press Start /

Pause button to start the programme.

4.11 Starting the programme

Press Start / Pause button to start the programme.

Programme follow-up light showing the startup of the

programme will turn on.

If no programme is started or no key is pressed within

1 minute during programme selection process, the

machine will switch to Pause mode and the illumination

level of the temperature, speed and loading door

indicator lights will decrease. Other indicator lights and

indicators will turn off. Once the Programme Selection

knob is rotated or any button is pressed, indicator lights

and indicators will turn on again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMY 71423 LMB3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMY 71423 LMB3 Manual

Product: