Manual BEKO WML 15105 J (page 21 of 32) (English)

600260

Zoom out

Zoom in

1/32

Preparation

1. Turn the tap on completely. Check if

the hoses are connected tightly.

2. Placethelaundryinthemachine.

3. Add detergent and softener.

Starting

1. Pressthe“On/Off”button.

2. Select the programme and the

temperature.

3. Ifrequired(accordingtoyour

machine’smodel):

– selectanyauxiliaryfunction,

– adjustthespinspeed,

– setthetimedelay,

4. Closetheloadingdoor.

5. PressStart/Pause/Cancelbutton.

Canceling a program

• Press“Start/Pause/Cancel”button

for 3 seconds. The machine starts

todischargethewater.“Wash”and

“ProgramFinished”lightswilllight

up.

• “Start/Pause/Cancel”and“Wash”

lights will go off after discharging

processisoverandthe“Lid”light

will start flashing.

• Iftheprogramiscancelledinthe

middleoftheprocess,“Wash”

and“ProgramFinished”lightswill

light up. The machine can drain

all the water or can take in water

for 3 times at most to cool down

the clothes and complete draining

process. When water discharging

processiscompleted,“Wash”light

willgooff,“ProgramFinished”light

willlightupandthe“Lid”lightwill

continuously flash until the door

isallowedtobeopened.Youcan

make a new program selection when

the“Lid”lightislitcontinuously.

Adding more laundry

Youmayaddmorelaundryintothe

machine at the beginning of washing.

C Machineallowsaddingmorelaundry

during a later step only if the water

level is low enough to open the

loading door or if the temperature in

the machine is low enough.

In order to add laundry after the start-up

oftheprogram:

1. PressStart/Pause/Cancelbutton.

Wait until the door is allowed

toopen.“Lid”lampwilllightup

continuously when the door is

allowed to open.

2. Opentheloadingdoorandputin

more laundry.

3. Close the loading door.

4. PressStart/Pause/Cancelbutton.

Program is in rinse hold mode

C After the machine fills with water in

the final rinse step, clothes can be

soaked in the machine as long as

desired.

When it reaches this position while the

machineisrunning,the“Start/Pause/

Cancel”lightwillflash.

In the machines equipped with spin

speed selection knob, you can spin by

selecting the desired spin speed and

press“Start/Pause/Cancel”button.

As for machines not equipped with a

spin speed selection knob, you can

end the program without spinning by

pressingthe“Start/Pause/Cancel”

buttontodrainthewater.Youmayspin

your clothes whenever you wish to by

selecting the spin program.

Re-spinning the laundry

The control system for an unbalanced

load can pause the spinning in cases

when the distribution of the laundry in

the drum is not balanced.

Ifyouwanttore-spintheclothes:

1. Rearrange the previously placed

clothes in machine.

2. SelectSpin+Pumpprogram.

6 Quick instructions for daily use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WML 15105 J in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WML 15105 J Manual

Product: