528055

BEKO WMI 71641 Manual

33
Zoom out
Zoom in
Previous page
1/48
Next page
EN
33
EN
33
Clothes do not smell like the softener.
- Insufficient amount of detergent used.
- The detergent was placed into the wrong
compartment;thedetergentwasmixed
with the softener.
- If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
Do not mix the softener with detergent when putting
in the compartment.
Wash and clean the drawer with hot water.
Detergent residue in the dispensing drawer.
- Detergent may have been put in wet
dispenser drawer.
- Detergent may have gotten damp.
- Water pressure might be low
- The detergent in the main wash
compartment might have gotten wet while
taking in the prewash water..
- Detergent might be mixed with the
bleaching agent.
- Dry the detergent drawer before putting in
detergent.
- Store detergent in a closed and dry location.
- Do not keep them under high temperatures.
-Thedetergentdispenseroutlet(holes)mayhavea
problem.
- There might be problems with the detergent
dispenser valves.
- Do not mix the softener with detergent when
putting in the compartment.
There is detergent left on the laundry.
- Excessive laundry loaded into machine.
-WrongProgrammeandtemperature
might have been selected.
- Wrong detergent may have been used.
- Do not load the machine in excess.
-SelecttheproperProgrammeandtemperaturefor
the laundry to be washed.
- Use wool detergents for woollens.
There is too much foam
.
-Youmaynotbeusingproperdetergentfor
automatic washing machines.
- Excessive amount of detergent may have
been used.
- Too much detergent may have been used
for a small amount of lightly soiled laundry.
- Detergent may have been stored
improperly.
-Typeofmaterialbeingwashed(laceitems
will cause excessive foam due to their
meshedstructure).
- Detergent might have been put in the
wrong compartment.
- Softener being released early.
- Use only automatic washing machine detergents
in your washing machine.
- Use only sufficient amount of detergent.
- Use only sufficient amount of detergent.
- Store detergent in a closed and dry location.
- Do not store in excessively hot places.
- Use smaller amounts of detergent for lace items.
- If you put detergent in the prewash compartment
although you have not selected a prewash cycle,
the machine can take this detergent during rinsing
or softener step.
- Too much softener was put in.
The detergent dispenser is problematic. Water is
siphoned(pullingthesoftenerintothewasherearly)
during the fill or rinse cycles.
Valves are problematic.
There is foaming over the detergent drawer
Too much detergent was used
Mix1tablespoonfulsoftenerand½literwater
and pour into the main wash compartment of the
detergent drawer.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMI 71641 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMI 71641 in the language / languages: English as an attachment in your email.

The manual is 5,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info