457432
21
Zoom out
Zoom in
Previous page
1/40
Next page
EN
21
1. Opentheloadingdoor,placethe
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and,
if required, select the auxiliary
functions.
3. Press“Timedelaying”buttons
“+”and“-”(Figure2-8)toset
your desired time delay. The Time
delayingsymbol(Figure3-13h)will
flash.
4. Press“Start/Pause/Cancel”button
(Figure2-10).Thenthetimedelay
starts to count down. The Time
delayingsymbol(Figure3-13h)will
lightup.TheStartsymbol(Figure
3-13j)willlightup.
 The“:”inthemiddleofthedisplayed
time delay will start to flash.
Morelaundrymaybeloadedor
taken out during the time delay
period. At the end of the time delay
countdown process, time delaying
symbol(Figure3-13h)fadesand
the washing starts as the program
duration is displayed.
Changing the delay time
If you want to change the time during
thecountdown:
1. Press“Start/Pause/Cancel”button
(Figure2-10).“:“inthemiddleof
the screen will stop flashing. The
Standbysymbol(Figure3-13k)will
light up. The Time delaying symbol
(Figure3-13h)willflash.TheStart
Symbol(Figure3-13j)willfade.
2. Press“Timedelaying”buttons“+”or
“-”(Figure2-8)tosetyourdesired
time delay.
3. Press“Start/Pause/Cancel”button
(Figure2-10).TheTimedelaying
symbol(Figure3-13h)willlightup.
TheStandbysymbol(Figure3-13k)
willfade.TheStartsymbol(Figure
3-13j)willlightup.
4. The“:”inthemiddleofthedisplayed
time delay will start to flash.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press“Start/Pause/Cancel”button
(Figure2-10).The“:”inthemiddle
of the displayed time delay will stop
flashing.
2. Startsymbol(Figure3-13j)willfade.
Thestandbysymbol(Figure3-13k)
andthetimedelayingsymbol(Figure
3-13h)willflash.
3. Presstimedelayingbutton“-”
(Figure2-8)todecreasethedesired
timedelay.Programdurationafter
30 minutes shall be displayed.
4. PressStart/Pause/CancelButton
(Figure2-10)tostarttheprogram.
Starting the Program
1. PressStart/Pause/Cancelbutton
(Figure2-10)tostarttheprogram.
2. Thestartsymbol(Figure3-13j)
which indicates that the program
has started will light up.
3. The door locks and the door locked
symbol(Figure3-13i)willlightup.
4. The Symbol of the relevant step
(prewash,mainwash,rinse,softener
andspin)thattheprogramhas
startedfromwilllightup(Figure
3-13f).
Progress of program
The progress of a running program is
shown through a number of symbols on
the screen.
At the beginning of each program
step, the relevant symbol in the
series of symbols will light up and
thus, at the end of the program,
all symbols will remain lit up. The
symbol that lights up at the far right
of the series of symbols indicates
the step that is being carried out.
Pre-wash
When "prewash" auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMD 78144 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMD 78144 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info