457432

BEKO WMD 78144 Manual

18
Zoom out
Zoom in
Previous page
1/40
Next page
EN
18
means higher power consumption.
C
For further program details, see
“ProgramSelectionTable”
Special programs
For specific applications, select any of
thefollowingprograms:
• Rinse
This program is used when you want to
rinse or starch separately.
• Spin + Drain
This program spins with maximum
possible rpm in the default setting after
the water drains from the machine.
C
Use a lower spin speed for delicate
laundries.
Temperature selection
Whenever a new program is selected,
the temperature anticipated for that
program appears on the temperature
indicator(13b).
To change the temperature, press
thetemperaturebutton(Figure
2-9).Temperaturedecreasesin10°
increments.
Coldselectionisshownwith“-”symbol.
Whenthe“Temperature”buttonis
pressed after Cold is selected, the
maximum temperature of the program
you have selected will be displayed.
To decrease the temperature, press the
“Temperature”buttonagain.
90˚C
Normally soiled, white cottons and
linens.(Ex.:coffeetablecovers,
tablecloths,towels,bedsheets)
60˚C
Normally soiled, fade proof colored
linens, cottons or synthetic clothes
(Ex.:shirts,nightgowns,pajamas)
and lightly soiled white linen clothes
(Ex.:underwear)
40˚C
30˚C
Cold
Blended clothes including
synthetics and woolens as well as
delicates.
Economy Symbol
Shows energy saving programs and
temperature selections.
As "Intensive" and "Hygiene" programs
are long programs with higher
temperature selections to ensure
hygiene,“Economy”Symbol(Figure
3-13g)willnotlightup.
e
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator(Figure3-13a).
To decrease the spin speed, press
the“Spin”button (Figure2-7).Spin
speed decreases gradually. Then, rinse
hold and no spin options are shown
respectively.
Rinse hold is shown with “ ”andno
spin is shown with “ ”symbols.
e
If you are not going to unload your
clothes immediately after the cycle, you
may use rinse hold function in order to
prevent your clothes become wrinkled
when there is no water in the machine.
With this function, your laundry is kept in
the final rinsing water. If you want to spin
yourlaundryaftertherinseholdfunction:
- Adjust the spin speed.
- Press“Start/Pause/Cancel”button.
Programresumes.Yourmachine
drains the water and spins your
laundry.
Youcanusenospinfunctioninorderto
drain the water without spinning at the
end of the program.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMD 78144 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMD 78144 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info