556825
27
Zoom out
Zoom in
Previous page
1/40
Next page
27
EN
6 Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if cleaned
at regular intervals.
Cleaning the detergent drawer
Clean the detergent drawer at regular intervals
(every 4-5 washing cycles) as shown below
in order to prevent accumulation of powder
detergent in time.
1. Press the dotted point on the siphon
in the softener compartment and pull
towards you until the compartment is
removed from the machine.
C
If more than normal amount of water and
softener mixture starts to gather in the
softener compartment, the siphon must
be cleaned.
2. Wash the detergent drawer and the
siphon with plenty of lukewarm water in a
washbasin. Wear protective gloves or use
an appropriate brush to avoid touching of
the residues in the drawer with your skin
when cleaning.
3. Insert the drawer back into its place after
cleaning and make sure that it is seated
well.
Cleaning the loading
door and the drum
Residues of softener, detergent and dirt may
accumulate in your machine in time and
may cause unpleasant odours and washing
complaints. To avoid this, use the Drum
Cleaning programme. If your machine is not
featured with Drum Cleaning programme, use
Cottons-90 programme and select Additional
Water or Extra Rinse auxiliary functions as
well. Before starting the programme, put max.
100 g of powder anti-limescale into the main
wash detergent compartment (compartment
nr. II). If the anti-limescale is in tablet form, put
only one tablet into compartment nr. II. Dry the
inside of the bellow with a clean piece of cloth
after the programme has come to an end.
C
Repeat Drum Cleaning process in every 2
months.
C
Use an anti-limescale suitable for the
washing machines.
After every washing make sure that no foreign
substance is left in the drum.
If the holes on the bellow shown in the figure
is blocked, open the holes using a toothpick.
C
Foreign metal substances in your
machine will cause rust stains. Clean
the stains on the drum surface by using
cleaning agents for stainless steel. Never
use steel wool or wire wool.
Cleaning the body and
control panel
Wipe the body of the machine with soapy
water or non-corrosive mild gel detergents as
necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean the
control panel.
A
Never use sponge or scrub materials.
These will damage the painted and
plastic surfaces.
Cleaning the water intake filters
There is a filter at the end of each water intake
valve at the rear of the machine and also at
the end of each water intake hose where they
are connected to the tap. These filters prevent
foreign substances and dirt in the water to
enter the washing machine. Filters should be
cleaned as they do get dirty.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMB71642 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB71642 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info