Manual BEKO WMB61631W (page 27 of 40) (English)

556835

Zoom out

Zoom in

1/40

6 Maintenance and cleaning

Service life of the product extends and

frequently faced problems decrease if

cleaned at regular intervals.

Cleaning the detergent drawer

Clean the detergent drawer at regular

intervals (every 4-5 washing cycles)

as shown below in order to prevent

accumulation of powder detergent in

time.

1. Press the dotted point on the siphon

in the softener compartment and pull

towards you until the compartment is

removed from the machine.

If more than normal amount of water

and softener mixture starts to gather

in the softener compartment, the

siphon must be cleaned.

2. Wash the detergent drawer and the

siphon with plenty of lukewarm water

in a washbasin. Wear protective

gloves or use an appropriate brush to

avoid touching of the residues in the

drawer with your skin when cleaning.

3. Insert the drawer back into its place

after cleaning and make sure that it is

seated well.

Cleaning the loading

door and the drum

Residues of softener, detergent and

dirt may accumulate in your machine in

time and may cause unpleasant odours

and washing complaints. To avoid this,

use the Drum Cleaning programme. If

your machine is not featured with Drum

Cleaning programme, use Cottons-90

programme and select Additional Water

or Extra Rinse auxiliary functions as well.

Before starting the programme, put

max. 100 g of powder anti-limescale into

the main wash detergent compartment

(compartment nr. II). If the anti-limescale

is in tablet form, put only one tablet into

compartment nr. II. Dry the inside of the

bellow with a clean piece of cloth after the

programme has come to an end.

Repeat Drum Cleaning process in

every 2 months.

Use an anti-limescale suitable for the

washing machines.

After every washing make sure that no

foreign substance is left in the drum.

If the holes on the bellow shown in the

figure is blocked, open the holes using a

toothpick.

Foreign metal substances in your

machine will cause rust stains. Clean

the stains on the drum surface by

using cleaning agents for stainless

steel. Never use steel wool or wire

wool.

Cleaning the body

and control panel

Wipe the body of the machine with

soapy water or non-corrosive mild gel

detergents as necessary, and dry with a

soft cloth.

Use only a soft and damp cloth to clean

the control panel.

Never use sponge or scrub materials.

These will damage the painted and

plastic surfaces.

Cleaning the water intake filters

There is a filter at the end of each water

intake valve at the rear of the machine

and also at the end of each water

intake hose where they are connected

to the tap. These filters prevent foreign

substances and dirt in the water to enter

the washing machine. Filters should be

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB61631W in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB61631W Manual

Product: