Manual BEKO WMB 91442 (page 65 of 68) (English, German, Dutch, French)

475973

Zoom out

Zoom in

1/68

programmewillturnon.Loadingdoorislockedand

DoorLockedsymbolappearsonthedisplay.The

symbolofthestepfromwhichtheprogrammehas

startedappearsonthedisplay(Prewash,MainWash,

Rinse, Softener and Spin).

Progress of programme

Progress of a running programme is indicated on the

displaywithasetofsymbols.

Relevant symbol appears on the display at

the beginning of each programme step and all

symbols remain lit at the end of the programme.

The farthermost right symbol indicates the current

programme step.

Prewash

IfthePrewashauxiliaryfunctionisselected,Prewash

symbol appears on the display indicating that the

prewashstephasstarted.

Main Wash

MainWashsymbolindicatingthatthemainwashstep

has started appears on the display.

Rinse

Rinse symbol indicating that the rinsing step has

started appears on the display.

Softener

Softener symbol indicating that the softener step has

started appears on the display.

Spin

Appears at the beginning of the final spin step

and remains lit during Spin and Pump special

programmes.

 Ifthemachinedoesnotpasstothespinning

step, Rinse Hold function might be active or the

automatic unbalanced load detection system

might be activated due to the unbalanced

distribution of the laundry in the machine.

Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases

whenthewaterlevelisunsuitable.

DoorLockedsymbolappearswhentheloadingdoor

islocked.Thissymbolwillflashuntiltheloadingdoor

becomesreadytoopenwhenprogrammecompletes

orthemachineispaused.Donotforcetoopenthe

loadingdoorinthisstep.Symboldisappearswhenthe

doorisreadytoopen.Youcanopenthedoorwhen

the symbol disappears.

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pause/Cancelbuttontoswitchthe

machine to pause mode. Pause symbol appears on

the display indicating that the machine is paused. Start

symbol disappears.

Changing the speed and temperature settings

for auxiliary functions

Dependingonthesteptheprogrammehasreached,

you may cancel or activate the auxiliary functions; see,

"Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

Adding or taking out laundry

PresstheStart/Pause/Cancelbuttontoswitchthe

machinetopausemode.Theprogrammefollow-up

lightoftherelevantstepduringwhichthemachine

wasswitchedintothepausemodewillflash. Wait

untiltheLoadingDoorcanbeopened.Openthe

LoadingDoorandaddortakeoutthelaundry.Close

theLoadingDoor.Makechangesinauxiliaryfunctions,

temperature and speed settings if necessary. Press

Start/Pause/Cancelbuttontostartthemachine.

 Theloadingdoorwillnotopenifthewater

temperatureinthemachineishighorthewater

level is above the door opening.

Child Lock

UseChildLockfunctiontopreventchildrenfrom

tamperingwiththemachine.Thusyoucanavoidany

changes in a running programme.

 YoucanswitchonandoffthemachinewithOn

/OffbuttonwhentheChildLockisactive.When

youswitchonthemachineagain,programmewill

resumefromwhereithasstopped.

To activate the Child Lock:

Press and hold 2

and 4

Auxiliary Function buttons

for 3 seconds. “Con” appears on the display.

 Samephrasewillappearonthedisplayifyou

pressanybuttonwhenChildLockisenabled.

To deactivate the Child Lock:

Press and hold 2

and 4

Auxiliary Function buttons

for 3 seconds. “COFF” appears on the display.

 Donotforgettodisablethechildlockatthe

endoftheprogrammeifitwasenabledbefore.

Otherwise,machinewillnotallowtoselectanew

programme.

Canceling the programme

PressandholdStart/Pause/Cancelbuttonfor3

seconds. Start symbol flashes. Symbol of the step

atwhichtheprogrammewascancelledremainslit.

"END" appears on the display and the programme is

cancelled.

 Ifyouwanttoopentheloadingdoorafteryou

have cancelled the programme but it is not

possibletoopentheloadingdoorsincethewater

level in the machine is above the loading door

opening, then turn the Programme Selection

knobtoPump+Spinprogrammeanddischarge

thewaterinthemachine.

Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol illuminates

whenthemachineisinRinseHoldmode.

Ifyouwanttospinyourlaundrywhenthemachineis

in this mode:

AdjustthespinspeedandpressStart/Pause/

Cancel button. Pause symbol disappears and Start

symbol appears. Programme resumes, discharges the

waterandspinsthelaundry.

Ifyouonlywanttodrainthewaterwithoutspinning:

JustpressStart/Pause/Cancelbutton.Pause

symbol disappears. Start symbol appears.

Programmeresumesanddischargesthewateronly.

End of programme

“End”appearsonthedisplayattheendofthe

programme. Symbols of the programme steps remain

lit. Auxiliary function, spin speed and temperature that

wereselectedatthebeginningoftheprogramme

remain selected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 91442 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB 91442 Manual

Product: