457431

BEKO WMB 91242 Manual

20
Zoom out
Zoom in
Previous page
1/40
Next page
20 - EN
Auxiliary functions
Auxiliary Function Selection Buttons
a b c d
• Dependingontheprogram,youcan
select the desired auxiliary function by
pressing the buttons a, b, c,d.
• Selecttherequiredauxiliaryfunctions
before starting the program.
• Somecombinationscannotbeselected
together.Ex.:Pre-washandQuick
Wash.
• Symboloftheselectedauxiliaryfunction
will light up.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary
function selection will remain active.
Ex.:Ifyouwanttoselectpre-washfirstand
then quick wash, pre-wash will be cancelled
and quick wash will remain active.
Auxiliary function that is not compatible
withtheprogramcannotbeselected.(see,
“ProgramSelectionTable”)
• Prewash
Whenyouselectthisfunction(a),thedisplay
willindicate“F1”symbol.
• Apre-washisonlyworthwhilefor
heavily soiled laundry. Without pre-wash
you save energy, water, detergent and
time.
• Pre-washwithoutdetergentis
recommended for lace and curtains.
• Quick Wash
Withthisfunction(b),thewashtimeis
shortened.“F2”symbollightsuponthe
display.
• Usethisfunctionforsmalleramountsor
slightly soiled laundries.
• Extra Rinse
Whenthisfunction(c)isselected,washing
and rinsing is performed with plenty of
water.“F3”symbollightsuponthedisplay.
• Anti- Crease
Withthisfunction(d),drummovement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level.“F4”symbollightsuponthedisplay.
• Usethisfunctionfordelicatelaundries
that crease easily.
C
Whenever you select this auxiliary
function, load your machine with half of
the maximum laundry specified in the
program table.
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes,
you may use rinse hold function and keep
your laundry in the final rinsing water in order
to prevent them become wrinkled when
thereisnowaterinthemachine.Press
“Start/Pause”buttonafterthisprocessifyou
want to drain the water without spinning.
Programresumes.Yourmachinedrainsthe
water and program completes.
If you want to spin your laundry that you left
inwater:
- Adjust the spin speed.
-PressStart/Pausebutton
Programresumes.Yourmachinedrains
the water, spins the laundry and program
completes.
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.
Time delay
Withthe“Timedelay”functionyoucan
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMB 91242 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 91242 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info