457431
9
Zoom out
Zoom in
Previous page
1/40
Next page
9 - EN
3
Installation
Removing packaging
reinforcement
Tilt the machine to remove the packaging
reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
Opening the transportation locks
C
Transportation safety bolts must be
removed before operating the washing
machine!Otherwise,themachinewillbe
damaged!
1. Loosen all the bolts with a spanner until
theyrotatefreely(“C”)
2. Remove transportation safety bolts by
turning them gently.
3. Fitthecovers(suppliedinthebagwith
theOperationManual)intotheholeson
therearpanel.(“P”)
C
Keepthetransportationsafetyboltsin
a safe place to reuse when the washing
machine needs to be moved again in
the future.
C
Never move the appliance without the
transportation safety bolts properly fixed
in place!
Appropriate installation location
Install the appliance in environments which
have no risk of freezing, in a stable and level
position.
C
The floor must be capable of carrying
the load on it!
C
If the washing machine and a drier
are placed on top of each other, their
approximate weight together may reach
180 kg when they are full.
Important:
• Donotplacetheapplianceontopof
the power cable.
• Keepatleast1cmdistancefromthe
edges of other furniture.
• Placethemachineonafirmsurface;do
not position it on a long pile rug or such
like surfaces.
Adjusting the feet
C
Do not use any tools to loosen the lock
nuts.Otherwise,theycanbedamaged.
1. Manually(byhand)loosenthelocknuts
on the feet.
2. Adjust them until the machine stands
level and firm.
3. Important:Tightenalllocknutsup
again.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMB 91242 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 91242 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info