528062

BEKO WMB 81443 PTHLC Manual

73
Zoom out
Zoom in
Previous page
1/79
Next page
73 / 76 EN
Washing Machine / User’s Manual
4.13 Starting the programme
PressStart/Pause/Cancelbuttontostarttheprogramme.
Startsymbolshowingthestartupoftheprogrammewillturn
on. Loading door is locked and Door Locked symbol appears
onthedisplay.Thesymbolofthestepfromwhichthe
programmehasstartedappearsonthedisplay(Prewash,
MainWash,Rinse,SoftenerandSpin).
4.14 Progress of programme
Progressofarunningprogrammeisindicatedonthedisplay
withasetofsymbols.
Relevant symbol appears on the display at the beginning of
each programme step and all symbols remain lit at the end
oftheprogramme.Thefarthermostrightsymbolindicates
the current programme step.
Prewash
IfthePrewashauxiliaryfunctionisselected,Prewashsymbol
appearsonthedisplayindicatingthattheprewashstephas
started.
Main Wash
MainWashsymbolindicatingthatthemainwashstephas
started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has started
appears on the display.
Softener
Softenersymbolindicatingthatthesoftenerstephasstarted
appears on the display.
Spin
Appears at the beginning of the final spin step and remains
litduringSpinandPumpspecialprogrammes.
C
Ifthemachinedoesnotpasstothespinningstep,
RinseHoldfunctionmightbeactiveortheautomatic
unbalanced load detection system might be activated
due to the unbalanced distribution of the laundry in the
machine.
4.15 Loading door lock
Thereisalockingsystemontheloadingdoorofthe
machinethatpreventsopeningofthedoorincaseswhen
thewaterlevelisunsuitable.
DoorLockedsymbolappearswhentheloadingdooris
locked.Thissymbolwillflashuntiltheloadingdoorbecomes
readytoopenwhenprogrammecompletesorthemachine
is paused. Do not force to open the loading door in this step.
Symboldisappearswhenthedoorisreadytoopen.Youcan
openthedoorwhenthesymboldisappears.
4.16 Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pause/Cancelbuttontoswitchthe
machinetopausemode.Pausesymbolappearsonthe
displayindicatingthatthemachineispaused.Startsymbol
disappears.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
function selection".
Youmayalsochangethespeedandtemperaturesettings;
see,"Spinspeedselection"and"Temperatureselection".
Adding or taking out laundry
PresstheStart/Pause/Cancelbuttontoswitchthe
machinetopausemode.Theprogrammefollow-uplightof
therelevantstepduringwhichthemachinewasswitched
intothepausemodewillflash.WaituntiltheLoadingDoor
can be opened. Open the Loading Door and add or take
out the laundry. Close the Loading Door. Make changes
inauxiliaryfunctions,temperatureandspeedsettingsif
necessary.PressStart/Pause/Cancelbuttontostartthe
machine.
C
Theloadingdoorwillnotopenifthewatertemperature
inthemachineishighorthewaterlevelisabovethe
door opening.
4.17 Child Lock
Use Child Lock function to prevent children from tampering
withthemachine.Thusyoucanavoidanychangesina
running programme.
C
YoucanswitchonandoffthemachinewithOn/Off
buttonwhentheChildLockisactive.Whenyouswitch
onthemachineagain,programmewillresumefrom
whereithasstopped.
To activate the Child Lock:
Pressandhold2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.“Con”appearsonthedisplay.
C
Samephrasewillappearonthedisplayifyoupress
anybuttonwhenChildLockisenabled.
To deactivate the Child Lock:
Pressandhold2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.“COFF”appearsonthedisplay.
C
Do not forget to disable the child lock at the end of
theprogrammeifitwasenabledbefore.Otherwise,
machinewillnotallowtoselectanewprogramme.
4.18 Cancelling the programme
PressandholdStart/Pause/Cancelbuttonfor3seconds.
Startsymbolflashes.Symbolofthestepatwhichthe
programmewascancelledremainslit."End"appearsonthe
display and the programme is cancelled.
C
Ifyouwanttoopentheloadingdoorafteryouhave
cancelled the programme but it is not possible to open
theloadingdoorsincethewaterlevelinthemachine
is above the loading door opening, then turn the
ProgrammeSelectionknobtoPump+Spinprogramme
anddischargethewaterinthemachine.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMB 81443 PTHLC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 81443 PTHLC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info