Manual BEKO WMB 81241 LW (page 28 of 40) (English)

556823

Zoom out

Zoom in

1/40

6 Maintenance and cleaning

Service life of the product extends and

frequently faced problems decrease if

cleaned at regular intervals.

Cleaning the detergent drawer

Clean the detergent drawer at regular

intervals (every 4-5 washing cycles)

as shown below in order to prevent

accumulation of powder detergent in time.

1. Press the dotted point on the siphon

in the softener compartment and pull

towards you until the compartment is

removed from the machine.

If more than normal amount of water

and softener mixture starts to gather in

the softener compartment, the siphon

must be cleaned.

2. Wash the detergent drawer and the

siphon with plenty of lukewarm water

in a washbasin. Wear protective gloves

or use an appropriate brush to avoid

touching of the residues in the drawer

with your skin when cleaning.

3. Insert the drawer back into its place

after cleaning and make sure that it is

seated well.

Cleaning the loading

door and the drum

Residues of softener, detergent and dirt

may accumulate in your machine in time

and may cause unpleasant odours and

washing complaints. To avoid this, use

the Drum Cleaning programme. If your

machine is not featured with Drum Cleaning

programme, use Cottons-90 programme

and select Additional Water or Extra Rinse

auxiliary functions as well. Before starting

the programme, put max. 100 g of powder

anti-limescale into the main wash detergent

compartment (compartment nr. II). If the

anti-limescale is in tablet form, put only

one tablet into compartment nr. II. Dry the

inside of the bellow with a clean piece of

cloth after the programme has come to an

end.

Repeat Drum Cleaning process in every

2 months.

Use an anti-limescale suitable for the

washing machines.

After every washing make sure that no

foreign substance is left in the drum.

If the holes on the bellow shown in the

figure is blocked, open the holes using a

toothpick.

Foreign metal substances in your

machine will cause rust stains. Clean

the stains on the drum surface by using

cleaning agents for stainless steel.

Never use steel wool or wire wool.

Cleaning the body and

control panel

Wipe the body of the machine with soapy

water or non-corrosive mild gel detergents

as necessary, and dry with a soft cloth.

Use only a soft and damp cloth to clean

the control panel.

Never use sponge or scrub materials.

These will damage the painted and

plastic surfaces.

Cleaning the water intake filters

There is a filter at the end of each water

intake valve at the rear of the machine

and also at the end of each water intake

hose where they are connected to the tap.

These filters prevent foreign substances

and dirt in the water to enter the washing

machine. Filters should be cleaned as they

do get dirty.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 81241 LW in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB 81241 LW Manual

Product: