Manual BEKO WMB 81041 LS (page 13 of 52) (English, French)

550079

Zoom out

Zoom in

1/52

flashing.Pausesymbolappears.DelayedStart

symbolflashes.Startsymboldisappears.Setthe

desireddelayedstarttimebypressingtheDelayed

Start+or-buttons.PressStart/Pause/Cancel

button.DelayedStartsymbolilluminatessteadily.

Pausesymboldisappears.Startsymbolappears.

“:” sign in the middle of the delayed start time on the

display starts flashing.

Canceling the Delayed Start function

Ifyouwanttocancelthedelayedstartcountdown

and start the programme immediately:

PressStart/Pause/Cancelbutton.“:”signinthe

middle of the delayed start time on the display stops

flashing.Startsymboldisappears.Pausesymbol

andDelayedStartsymbolflashes.Decreasethe

delayedstarttimebypressingtheDelayedStart

-button.Programmedurationappearsafter30

minutes.PressStart/Pause/Cancelbuttontostart

the programme.

Starting the programme

PressStart/Pause/Cancelbuttontostartthe

programme.Startsymbolshowingthestartupof

theprogrammewillturnon.Loadingdoorislocked

andDoorLockedsymbolappearsonthedisplay.

Thesymbolofthestepfromwhichtheprogramme

has started appears on the display (Prewash, Main

Wash, Rinse, Softener and Spin).

Progress of programme

Progress of a running programme is indicated on the

displaywithasetofsymbols.

Relevantsymbolappearsonthedisplayat

thebeginningofeachprogrammestepandall

symbolsremainlitattheendoftheprogramme.

Thefarthermostrightsymbolindicatesthecurrent

programme step.

Prewash

IfthePrewashauxiliaryfunctionisselected,Prewash

symbolappearsonthedisplayindicatingthatthe

prewash step has started.

Main Wash

MainWashsymbolindicatingthatthemainwash

step has started appears on the display.

Rinse

Rinsesymbolindicatingthattherinsingstephas

started appears on the display.

Softener

Softenersymbolindicatingthatthesoftenerstephas

started appears on the display.

Spin

Appearsatthebeginningofthefinalspinstep

and remains lit during Spin and Pump special

programmes.

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactiveorthe

automaticunbalancedloaddetectionsystem

mightbeactivatedduetotheunbalanced

distributionofthelaundryinthemachine.

Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases

whenthewaterlevelisunsuitable.

DoorLockedsymbolappearswhentheloading

doorislocked.Thissymbolwillflashuntiltheloading

doorbecomesreadytoopenwhenprogramme

completesorthemachineispaused.Donotforce

toopentheloadingdoorinthisstep.Symbol

disappears when the door is ready to open. You can

openthedoorwhenthesymboldisappears.

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pause/Cancelbuttontoswitchthe

machinetopausemode.Pausesymbolappearson

the display indicating that the machine is paused.

Startsymboldisappears.

Changing the speed and temperature settings

for auxiliary functions

Dependingonthesteptheprogrammehasreached,

you may cancel or activate the auxiliary functions;

see, "Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

Adding or taking out laundry

PresstheStart/Pause/Cancelbuttontoswitch

the machine to pause mode. The programme

follow-uplightoftherelevantstepduringwhichthe

machine was switched into the pause mode will

flash. WaituntiltheLoadingDoorcanbeopened.

OpentheLoadingDoorandaddortakeoutthe

laundry.ClosetheLoadingDoor.Makechangesin

auxiliary functions, temperature and speed settings

ifnecessary.PressStart/Pause/Cancelbuttonto

start the machine.

The loading door will not open if the water

temperature in the machine is high or the water

levelisabovethedooropening.

Child Lock

UseChildLockfunctiontopreventchildrenfrom

tampering with the machine. Thus you can avoid any

changes in a running programme.

You can switch on and off the machine with

On/OffbuttonwhentheChildLockisactive.

When you switch on the machine again,

programme will resume from where it has

stopped.

ToactivatetheChildLock:

Press and hold 2

and 4

AuxiliaryFunctionbuttons

for 3 seconds. “Con” appears on the display.

Same phrase will appear on the display if you

pressanybuttonwhenChildLockisenabled.

TodeactivatetheChildLock:

Press and hold 2

and 4

AuxiliaryFunctionbuttons

for3seconds.“COFF”appearsonthedisplay.

 Donotforgettodisablethechildlockatthe

endoftheprogrammeifitwasenabledbefore.

Otherwise,machinewillnotallowtoselecta

new programme.

Canceling the programme

PressandholdStart/Pause/Cancelbuttonfor3

seconds.Startsymbolflashes.Symbolofthestep

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 81041 LS in the language / languages: English, French as an attachment in your email.

The manual is 3,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB 81041 LS Manual

Product: