Manual BEKO WMB 71413 LM (page 79 of 84) (English, German, Dutch, French)

579424

Zoom out

Zoom in

1/84

79 / EN

Washing Machine / User’s Manual

flashes. Decrease the delayed start time by pressing the

Delayed Start - button. Programme duration appears after

30 minutes. Press Start / Pause / Cancel button to start the

programme.

4.13 Starting the programme

Press Start / Pause / Cancel button to start the programme.

Start symbol showing the startup of the programme will turn

on. Loading door is locked and Door Locked symbol appears

on the display. The symbol of the step from which the

programme has started appears on the display (Prewash,

Main Wash, Rinse, Softener and Spin).

4.14 Progress of programme

Progress of a running programme is indicated on the display

with a set of symbols.

Relevant symbol appears on the display at the beginning of

each programme step and all symbols remain lit at the end

of the programme. The farthermost right symbol indicates

the current programme step.

Prewash

If the Prewash auxiliary function is selected, Prewash symbol

appears on the display indicating that the prewash step has

started.

Main Wash

Main Wash symbol indicating that the main wash step has

started appears on the display.

Rinse

Rinse symbol indicating that the rinsing step has started

appears on the display.

Softener

Softener symbol indicating that the softener step has started

appears on the display.

Spin

Appears at the beginning of the final spin step and remains

lit during Spin and Pump special programmes.

If the machine does not pass to the spinning step,

Rinse Hold function might be active or the automatic

unbalanced load detection system might be activated

due to the unbalanced distribution of the laundry in the

machine.

4.15 Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases when

the water level is unsuitable.

Door Locked symbol appears when the loading door is

locked. This symbol will flash until the loading door becomes

ready to open when programme completes or the machine

is paused. Do not force to open the loading door in this step.

Symbol disappears when the door is ready to open. You can

open the door when the symbol disappears.

4.16 Changing the selections after

programme has started

Switching the machine to pause mode

Press the Start / Pause / Cancel button to switch the

machine to pause mode. Pause symbol appears on the

display indicating that the machine is paused. Start symbol

disappears.

Changing the speed and temperature settings for

auxiliary functions

Depending on the step the programme has reached, you

may cancel or activate the auxiliary functions; see, "Auxiliary

function selection".

You may also change the speed and temperature settings;

see, "Spin speed selection" and "Temperature selection".

Adding or taking out laundry

Press the Start / Pause / Cancel button to switch the

machine to pause mode. The programme follow-up light of

the relevant step during which the machine was switched

into the pause mode will flash. Wait until the Loading Door

can be opened. Open the Loading Door and add or take

out the laundry. Close the Loading Door. Make changes

in auxiliary functions, temperature and speed settings if

necessary. Press Start / Pause / Cancel button to start the

machine.

The loading door will not open if the water temperature

in the machine is high or the water level is above the

door opening.

4.17 Child Lock

Use Child Lock function to prevent children from tampering

with the machine. Thus you can avoid any changes in a

running programme.

You can switch on and off the machine with On / Off

button when the Child Lock is active. When you switch

on the machine again, programme will resume from

where it has stopped.

To activate the Child Lock:

Press and hold 2

and 4

Auxiliary Function buttons for 3

seconds. “Con” appears on the display.

Same phrase will appear on the display if you press

any button when Child Lock is enabled.

To deactivate the Child Lock:

Press and hold 2

and 4

Auxiliary Function buttons for 3

seconds. “COFF” appears on the display.

Do not forget to disable the child lock at the end of

the programme if it was enabled before. Otherwise,

machine will not allow to select a new programme.

4.18 Cancelling the programme

Press and hold Start / Pause / Cancel button for 3 seconds.

Start symbol flashes. Symbol of the step at which the

programme was cancelled remains lit. "End" appears on the

display and the programme is cancelled.

If you want to open the loading door after you have

cancelled the programme but it is not possible to open

the loading door since the water level in the machine

is above the loading door opening, then turn the

Programme Selection knob to Pump+Spin programme

and discharge the water in the machine.

4.19 Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol illuminates when the

machine is in Rinse Hold mode.

If you want to spin your laundry when the machine is in this

mode:

Adjust the spin speed and press Start / Pause / Cancel

button. Pause symbol disappears and Start symbol appears.

Programme resumes, discharges the water and spins the

laundry.

If you only want to drain the water without spinning:

Just press Start / Pause / Cancel button. Pause symbol

disappears. Start symbol appears. Programme resumes and

discharges the water only.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 71413 LM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB 71413 LM Manual

Product: