550073
13
Zoom out
Zoom in
Previous page
1/56
Next page
13
EN
symbol flashes. Start symbol disappears. Set the
desireddelayedstarttimebypressingtheDelayed
Start+or-buttons.PressStart/Pause/Cancel
button.DelayedStartsymbolilluminatessteadily.
Pause symbol disappears. Start symbol appears.
“:sign in the middle of the delayed start time on the
display starts flashing.
Canceling the Delayed Start function
Ifyouwanttocancelthedelayedstartcountdown
and start the programme immediately:
Press Start / Pause / Cancel button.:” sign in the
middle of the delayed start time on the display stops
flashing. Start symbol disappears. Pause symbol and
DelayedStartsymbolflashes.Decreasethedelayed
starttimebypressingtheDelayedStart-button.
Programmedurationappearsafter30minutes.
Press Start / Pause / Cancel button to start the
programme.
Starting the programme
Press Start / Pause / Cancel button to start the
programme. Start symbol showing the startup of the
programme will turn on. Loading door is locked and
DoorLockedsymbolappearsonthedisplay.The
symbol of the step from which the programme has
started appears on the display (Prewash, Main Wash,
Rinse, Softener and Spin).
Progress of programme
Progress of a running programme is indicated on the
display with a set of symbols.
Relevant symbol appears on the display at
the beginning of each programme step and all
symbols remain lit at the end of the programme.
The farthermost right symbol indicates the current
programme step.
Prewash
IfthePrewashauxiliaryfunctionisselected,Prewash
symbol appears on the display indicating that the
prewash step has started.
Main Wash
Main Wash symbol indicating that the main wash
step has started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has
started appears on the display.
Softener
Softener symbol indicating that the softener step has
started appears on the display.
Spin
Appears at the beginning of the final spin step
and remains lit during Spin and Pump special
programmes.
C
Ifthemachinedoesnotpasstothespinning
step,RinseHoldfunctionmightbeactiveorthe
automatic unbalanced load detection system
might be activated due to the unbalanced
distribution of the laundry in the machine.
Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
DoorLockedsymbolappearswhentheloading
door is locked. This symbol will flash until the loading
door becomes ready to open when programme
completesorthemachineispaused.Donotforce
to open the loading door in this step. Symbol
disappears when the door is ready to open. You can
open the door when the symbol disappears.
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears on
the display indicating that the machine is paused.
Start symbol disappears.
Changing the speed and temperature settings
for auxiliary functions
Dependingonthesteptheprogrammehasreached,
you may cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
Press the Start / Pause / Cancel button to switch
the machine to pause mode. The programme
follow-uplightoftherelevantstepduringwhichthe
machine was switched into the pause mode will
flash. WaituntiltheLoadingDoorcanbeopened.
OpentheLoadingDoorandaddortakeoutthe
laundry.ClosetheLoadingDoor.Makechangesin
auxiliary functions, temperature and speed settings
if necessary. Press Start / Pause / Cancel button to
start the machine.
C
The loading door will not open if the water
temperature in the machine is high or the water
level is above the door opening.
Child Lock
UseChildLockfunctiontopreventchildrenfrom
tampering with the machine. Thus you can avoid any
changes in a running programme.
C
YoucanswitchonandoffthemachinewithOn
/OffbuttonwhentheChildLockisactive.When
you switch on the machine again, programme
will resume from where it has stopped.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function buttons
for 3 seconds. “Conappears on the display.
C
Same phrase will appear on the display if you
press any button when Child Lock is enabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function buttons
for3seconds.“COFF”appearsonthedisplay.
C
Donotforgettodisablethechildlockatthe
end of the programme if it was enabled before.
Otherwise,machinewillnotallowtoselecta
new programme.
Canceling the programme
Press and hold Start / Pause / Cancel button for 3
seconds. Start symbol flashes. Symbol of the step
at which the programme was cancelled remains lit.
"END" appears on the display and the programme is
cancelled.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMB 71041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 71041 in the language / languages: English, French as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info