Manual BEKO WMB 61232 MC (page 75 of 84) (English, German, Dutch, French)

676611

Zoom out

Zoom in

1/84

75 / EN

Washing Machine / User’s Manual

4.11 Starting the programme

Press Start / Pause button to start the programme.

Programme follow-up light showing the startup of the

programme will turn on.

If no programme is started or no key is pressed within

1 minute during programme selection process, the

machine will switch to Pause mode and the illumination

level of the temperature, speed and loading door

indicator lights will decrease. Other indicator lights and

indicators will turn off. Once the Programme Selection

knob is rotated or any button is pressed, indicator lights

and indicators will turn on again.

4.12 Child Lock

Use Child Lock function to prevent children from tampering

with the machine. Thus you can avoid any changes in a

running programme.

If the Programme Selection knob is turned when the

Child Lock is active, “Con” appears on the display.

The Child Lock does not allow any change in the

programmes and the selected temperature, speed and

auxiliary functions.

Even if another programme is selected with the

Programme Selection knob while the Child Lock is

active, previously selected programme will continue

running.

To activate the Child Lock:

Press and hold 1

and 2

Auxiliary Function buttons for

3 seconds. The lights on the 1

and 2

Auxiliary Function

buttons will flash, and "C03", "C02", "C01" will appear on

the display respectively while you keep the buttons pressed

for 3 seconds. Then, "Con" will appear on the display

indicating that the Child Lock is activated. If you press any

button or turn the Programme Selection knob when the Child

Lock is active, same phrase will appear on the display. The

lights on the 1st and 2nd auxiliary function buttons that are

used to deactivate the Child Lock will blink 3 times.

To deactivate the Child Lock:

Press and hold 1

and 2

auxiliary function buttons for 3

seconds while any programme is running. The lights on the

and 2

Auxiliary Function buttons will flash, and "C03",

"C02", "C01" will appear on the display respectively while

you keep the buttons pressed for 3 seconds. Then, "COFF"

will appear on the display indicating that the Child Lock is

deactivated.

In addition to the method above, to deactivate the Child

Lock, switch the Programme Selection knob to On /

Off position when no programme is running, and select

another programme.

Child Lock is not deactivated after power failures or

when the machine is unplugged.

4.13 Progress of programme

Progress of a running programme can be followed from the

Programme Follow-up indicator. At the beginning of every

programme step, the relevant indicator light will turn on and

light of the completed step will turn off.

You can change the auxiliary functions, speed and

temperature settings without stopping the programme flow

while the programme is running. To do this, the change

you are going to make must be in a step after the running

programme step. If the change is not compatible, relevant

lights will flash for 3 times.

If the machine does not pass to the spinning step,

Rinse Hold function might be active or the automatic

unbalanced load detection system might be activated

due to the unbalanced distribution of the laundry in the

machine.

4.14 Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases when

the water level is unsuitable.

Loading door light will start flashing when the machine

is switched to Pause mode. Machine checks the level of

the water inside. If the level is suitable, Loading Door light

illuminates steadily within 1-2 minutes and the loading door

can be opened.

If the level is unsuitable, Loading Door light turns off and the

loading door cannot be opened. If you are obliged to open

the Loading Door while the Loading Door light is off, you

have to cancel the current programme; see "Canceling the

programme".

4.15 Changing the selections after

programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the machine to

pause mode while a programme is running. The light of

the step which the machine is in starts flashing in the

Programme Follow-up indicator to show that the machine

has been switched to the pause mode.

Also, when the loading door is ready to be opened, Loading

Door light will also illuminate continuously in addition to the

programme step light.

Changing the speed and temperature settings for

auxiliary functions

Depending on the step the programme has reached, you

may cancel or activate the auxiliary functions; see, "Auxiliary

function selection".

You may also change the speed and temperature settings;

see, "Spin speed selection" and "Temperature selection".

If no change is allowed, the relevant light will flash for

3 times.

Adding or taking out laundry

Press the Start / Pause button to switch the machine to

pause mode. The programme follow-up light of the relevant

step during which the machine was switched into the pause

mode will flash. Wait until the Loading Door can be opened.

Open the Loading Door and add or take out the laundry.

Close the Loading Door. Make changes in auxiliary functions,

temperature and speed settings if necessary. Press Start /

Pause button to start the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 61232 MC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB 61232 MC Manual

Product: