Manual BEKO WMB 61232 M (page 13 of 72) (English)

616525

Zoom out

Zoom in

1/72

13 / 71 EN

Washing Machine / User’s Manual

Ifnoprogrammeisstartedornokeyispressedwithin

1minuteduringprogrammeselectionprocess,the

machinewillswitchtoPausemodeandtheillumination

levelofthetemperature,speedandloadingdoor

indicator lights will decrease. Other indicator lights and

indicatorswillturnoff.OncetheProgrammeSelection

knobisrotatedoranybuttonispressed,indicatorlights

and indicators will turn on again.

4.12 Child Lock

UseChildLockfunctiontopreventchildrenfromtampering

with the machine. Thus you can avoid any changes in a

running programme.

IftheProgrammeSelectionknobisturnedwhenthe

ChildLockisactive,“Con”appearsonthedisplay.

TheChildLockdoesnotallowanychangeinthe

programmesandtheselectedtemperature,speedand

auxiliary functions.

Even if another programme is selected with the

ProgrammeSelectionknobwhiletheChildLockis

active,previouslyselectedprogrammewillcontinue

running.

To activate the Child Lock:

Pressandhold1

and 2

AuxiliaryFunctionbuttonsfor

3 seconds. The lights on the 1

and 2

AuxiliaryFunction

buttonswillflash,and"C03","C02","C01"willappearon

thedisplayrespectivelywhileyoukeepthebuttonspressed

for3seconds.Then,"Con"willappearonthedisplay

indicatingthattheChildLockisactivated.Ifyoupressany

buttonorturntheProgrammeSelectionknobwhentheChild

Lockisactive,samephrasewillappearonthedisplay.The

lightsonthe1stand2ndauxiliaryfunctionbuttonsthatare

usedtodeactivatetheChildLockwillblink3times.

TodeactivatetheChildLock:

Pressandhold1

and 2

auxiliaryfunctionbuttonsfor3

seconds while any programme is running. The lights on the

and 2

AuxiliaryFunctionbuttonswillflash,and"C03",

"C02","C01"willappearonthedisplayrespectivelywhile

youkeepthebuttonspressedfor3seconds.Then,"COFF"

willappearonthedisplayindicatingthattheChildLockis

deactivated.

Inadditiontothemethodabove,todeactivatetheChild

Lock,switchtheProgrammeSelectionknobtoOn/

Offpositionwhennoprogrammeisrunning,andselect

another programme.

ChildLockisnotdeactivatedafterpowerfailuresor

when the machine is unplugged.

4.13 Progress of programme

Progressofarunningprogrammecanbefollowedfromthe

ProgrammeFollow-upindicator.Atthebeginningofevery

programmestep,therelevantindicatorlightwillturnonand

light of the completed step will turn off.

Youcanchangetheauxiliaryfunctions,speedand

temperature settings without stopping the programme flow

whiletheprogrammeisrunning.Todothis,thechange

youaregoingtomakemustbeinastepaftertherunning

programmestep.Ifthechangeisnotcompatible,relevant

lights will flash for 3 times.

Ifthemachinedoesnotpasstothespinningstep,

RinseHoldfunctionmightbeactiveortheautomatic

unbalancedloaddetectionsystemmightbeactivated

duetotheunbalanceddistributionofthelaundryinthe

machine.

4.14 Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases when

thewaterlevelisunsuitable.

Loading door light will start flashing when the machine

isswitchedtoPausemode.Machinechecksthelevelof

thewaterinside.Ifthelevelissuitable,LoadingDoorlight

illuminates steadily within 1-2 minutes and the loading door

canbeopened.

Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe

loadingdoorcannotbeopened.Ifyouareobligedtoopen

theLoadingDoorwhiletheLoadingDoorlightisoff,you

havetocancelthecurrentprogramme;see"Cancelingthe

programme".

4.15 Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pausebuttontoswitchthemachineto

pause mode while a programme is running. The light of

the step which the machine is in starts flashing in the

ProgrammeFollow-upindicatortoshowthatthemachine

hasbeenswitchedtothepausemode.

Also,whentheloadingdoorisreadytobeopened,Loading

Doorlightwillalsoilluminatecontinuouslyinadditiontothe

programme step light.

Changing the speed and temperature settings for

auxiliary functions

Dependingonthesteptheprogrammehasreached,you

maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary

functionselection".

You may also change the speed and temperature settings;

see,"Spinspeedselection"and"Temperatureselection".

Ifnochangeisallowed,therelevantlightwillflashfor

3 times.

Adding or taking out laundry

PresstheStart/Pausebuttontoswitchthemachineto

pause mode. The programme follow-up light of the relevant

step during which the machine was switched into the pause

mode will flash. WaituntiltheLoadingDoorcanbeopened.

OpentheLoadingDoorandaddortakeoutthelaundry.

ClosetheLoadingDoor. Makechangesinauxiliaryfunctions,

temperature and speed settings if necessary. PressStart/

Pausebuttontostartthemachine.

4.16 Canceling the programme

Tocanceltheprogramme,turntheProgrammeSelection

knobtoselectanotherprogramme.Previousprogramme

willbecanceled.End/Cancellightwillflashcontinuouslyto

notifythattheprogrammehasbeencanceled.

Pumpfunctionisactivatedfor1-2minutesregardlessofthe

programmestep,andwhetherthereiswaterinthemachine

ornot.Afterthisperiod,yourmachinewillbereadytostart

with the first step of the new programme.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 61232 M in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB 61232 M Manual

Product: