556968
24
Zoom out
Zoom in
Previous page
1/36
Next page
24 / 36 EN
Washing Machine / User‘s Manual
Operating the product
4. Press Start / Pause button. Previous delayed
start time light turns off and next delayed start
time light turns on after every 3 hours.
5. At the end of the countdown, all delayed start
lights will turn off and the selected programme
will start.
C
Additional laundry may be loaded during
the delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button
is pressed, the period will change in 3-hour
increments and the light of the selected delayed
start time will turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown
and start the programme immediately:
1. Set the Delayed Start period to zero (all delayed
start period lights will turn off) or turn the
Programme Selection knob to any programme.
Thus, Delayed Start function will be canceled.
The End/Cancel light flashes continuously.
2. Then, select the programme you want to run
again.
3. Press Start / Pause button to start the
programme.
5.11 Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the startup
of the programme will turn on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated or
any button is pressed, indicator lights and
indicators will turn on again.
5.12 Child Lock
Use child lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
If the Programme Selection knob is
turned when the Child Lock is active,
“Con”appearsonthedisplay.The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
C
Even if another programme is selected
with the Programme Selection knob
while the Child Lock is active, previously
selected programme will continue
running.
C
When the Child Lock is active and the
machine is running, you can switch
the machine to Pause mode without
deactivating the Child Lock by turning
the Programme Selection knob to
On / Off position. When you turn the
Programme Selection knob afterwards,
the programme will resu
To activate the Child Lock:
Press and hold 1st and 2nd Auxiliary Function
buttons for 3 seconds. The lights on the 1st and
2nd Auxiliary Function buttons will flash while you
keep the buttons pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1st and 2nd auxiliary function
buttons for 3 seconds while any programme is
running. The lights on the 1st and 2nd Auxiliary
Function buttons will flash while you keep the
buttons pressed for 3 seconds.
C
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On / Off
position when no programme is running,
and select another programme.
C
When the power is restored after a power
failure or after your machine is unplugged
and plugged in again, the Child Lock will
not be deactivated when the machine
resumes operating.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WMB 51221 W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 51221 W in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info