Manual BEKO WMB 51221 C (page 68 of 76) (English, German, Dutch, French)

676601

Zoom out

Zoom in

1/76

ProgrammeSelectionknobtoanyprogramme.

Thus,DelayedStartfunctionwillbecanceled.The

End/Cancel light flashes continuously. Then, select

theprogrammeyouwanttorunagain.PressStart

/Pausebuttontostarttheprogramme.

Starting the programme

PressStart/Pausebuttontostarttheprogramme.

Programmefollow-uplightshowingthestartupof

the programme will turn on.

 Ifnoprogrammeisstartedornokeyis

pressedwithin1minuteduringprogramme

selection process, the machine will switch

toPausemodeandtheilluminationlevelof

the temperature, speed and loading door

indicator lights will decrease. Other indicator

lights and indicators will turn off. Once the

ProgrammeSelectionknobisrotatedor

any button is pressed, indicator lights and

indicators will turn on again.

Child Lock

Use child lock function to prevent children from

tampering with the machine. Thus you can avoid

any changes in a running programme.

 IftheProgrammeSelectionknobisrotated

when the child lock is active, the lights on the

and 2

auxiliaryfunctionbuttonswillblink

3 times. The child lock does not allow any

change in the programmes and the selected

temperature,speedandauxiliaryfunctions.

Even if another programme is selected with

theProgrammeSelectionknobwhiletheChild

Lockisactive,previouslyselectedprogramme

will continue running.

 WhentheChildLockisactiveandthe

machine is running, you can switch the

machinetoPausemodewithoutdeactivating

theChildLockbyturningtheProgramme

SelectionknobtoOn/Offposition.When

youturntheProgrammeSelectionknob

afterwards, the programme will resume.

ToactivatetheChildLock:

Pressandhold1

and 2

AuxiliaryFunction

buttonsfor3seconds.Thelightsonthe1

and 2

AuxiliaryFunctionbuttonswillflashwhileyoukeep

the buttons pressed for 3 seconds.

TodeactivatetheChildLock:

Pressandhold1

and 2

auxiliaryfunction

buttons for 3 seconds while any programme is

running.Thelightsonthe1

and 2

Auxiliary

Functionbuttonswillflashwhileyoukeepthe

buttons pressed for 3 seconds.

 Inadditiontothemethodabove,todeactivate

theChildLock,switchtheProgramme

SelectionknobtoOn/Offpositionwhenno

programme is running, and select another

programme.

 Whenthepowerisrestoredafterapower

failure or after your machine is unplugged

andpluggedinagain,theChildLockwillnot

be deactivated when the machine resumes

operating.

Progress of programme

Progressofarunningprogrammecanbefollowed

fromtheProgrammeFollow-upindicator.At

the beginning of every programme step, the

relevant indicator light will turn on and light of the

completed step will turn off.

Youcanchangetheauxiliaryfunctions,speed

and temperature settings without stopping the

programme flow while the programme is running.

To do this, the change you are going to make must

beinastepaftertherunningprogrammestep.If

the change is not compatible, relevant lights will

flash for 3 times.

 Ifthemachinedoesnotpasstothespinning

step, Rinse Hold function might be active

or the automatic unbalanced load detection

system might be activated due to the

unbalanced distribution of the laundry in the

machine.

Loading door lock

There is a locking system on the loading door of

the machine that prevents opening of the door in

cases when the water level is unsuitable.

Loadingdoorlightwillstartflashingwhenthe

machineisswitchedtoPausemode.Machine

checksthelevelofthewaterinside.Ifthelevelis

suitable,LoadingDoorlightilluminatessteadily

within1-2minutesandtheloadingdoorcanbe

opened.

Ifthelevelisunsuitable,LoadingDoorlightturns

offandtheloadingdoorcannotbeopened.If

youareobligedtoopentheLoadingDoorwhile

theLoadingDoorlightisoff,youhavetocancel

the current programme; see "Canceling the

programme".

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pausebuttontoswitchthe

machine to pause mode while a programme is

running. The light of the step which the machine

isinstartsflashingintheProgrammeFollow-up

indicator to show that the machine has been

switched to the pause mode.

Also,whentheloadingdoorisreadytobeopened,

LoadingDoorlightwillalsoilluminatecontinuously

in addition to the programme step light.

Changing the speed and temperature settings

for auxiliary functions

Depending on the step the programme has

reached,youmaycanceloractivatetheauxiliary

functions;see,"Auxiliaryfunctionselection".

You may also change the speed and temperature

settings;see,"Spinspeedselection"and

"Temperature selection".

 Ifnochangeisallowed,therelevantlightwill

flash for 3 times.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WMB 51221 C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO WMB 51221 C Manual

Product: