556833
24
Zoom out
Zoom in
Previous page
1/40
Next page
EN
Auxiliary function selection
Use the following auxiliary functions
according to your daily needs. Select
the desired auxiliary functions before
starting the programme. Furthermore,
you may also select or cancel auxiliary
functions that are suitable to the running
programme without pressing the Start
operating. For this, the machine must be
in a step before the auxiliary function you
are going to select or cancel.
If the auxiliary function cannot be selected
or cancelled, light of the relevant auxiliary
function will blink 3 times to warn the user.
Some functions cannot be selected
together. For example, Prewash and
Quick Wash.
If a second auxiliary function
conflicting with the first one is
selected before starting the machine,
the function selected first will be
cancelled and the second auxiliary
function selection will remain active.
For example, if you want to select
Quick Wash after you have selected
the Prewash, Prewash will be
cancelled and Quick Wash will remain
active.
compatible with the programme
cannot be selected. (See "Programme
and consumption table")
vary according to the model of the
machine.
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
Prewash without detergent is
recommended for tulle and curtains.
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of
rinsing steps for lightly soiled laundry.
When you select this function,
load your machine with half of the
maximum laundry specified in the
programme table.
If you are not going to unload your
clothes immediately after the programme
completes, you may use rinse hold
function to keep your laundry in the final
rinsing water in order to prevent them
from getting wrinkled when there is no
button after this process if you want to
drain the water without spinning your
laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in
The programme resumes. Water
is drained, laundry is spun and the
programme is completed.
Delayed Start (In some models only)
With the Delayed Start function the
startup of the programme may be delayed
Do not use liquid detergents when
you set Delayed Start! There is the
risk of staining of the clothes.
Open the loading door, place the
laundry and put detergent, etc. Select
the washing programme, temperature,
spin speed and, if required, the auxiliary
functions. Set the desired time by
pressing the Delayed Start button. When
the button is pressed once, 3 hours
delayed start is selected. When the same
is selected, and when it is pressed for
selected. If you press the Delayed Start
button once again, Delayed Start function
button. Previous delayed start time light
will be cancelled. Press Start/Pause
turns off and next delayed start time light
the countdown, all delayed start lights will
turn off and the selected programme will
start.
during the delayed start period.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WM7120W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WM7120W in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info