582418
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
EN
C
The spin speed and temperature which
are selected first will keep on being
valid even if the position of the spin
speed or temperature selection knob is
changed. Press “Start/Pause/Cancel”
button and switch the machine to
“Pause” mode in order to change the
spin speed or temperature. New spin
speed or temperature can be selected.
Adding/removing laundry in standby
mode
If you want to add more laundry into the
machine after the washing cycle has
started, put the machine into “Pause”
mode by pressing the “Start/Pause/
Cancel” button. The “Ready” lamp on the
programme follow-up indicator will light
up after 1-2 minutes if the water level in
the machine is suitable. Laundry may be
added or taken out by opening the door.
If the “Ready” lamp does not light up
continuously at the end of this time, the
water level in the machine is not suitable
and laundry cannot be added. You can
resume the programme by pressing the
“Start/Pause/Cancel” button again.
Child/key lock
There is a child/key lock to prevent any
programme interruption because of
pressing the keys while the programme is
on.
C
Your machine can be turned on and off
with On/Off button while the child-proof
lock is activated. In this case, your
machine will resume its programme
with child-proof lock activated.
In order to activate the childproof lock,
press on the 1st and 2nd auxiliary function
keys from the left simultaneously for 3
seconds after the washing programme has
started. 1st auxiliary function light will flash
continuously.
To start a new programme after the
programme is over or to interfere the
programme, child/key lock should be
deactivated. To deactivate the child-proof
lock, press the same buttons for 3 sec.
Ending the programme
through cancelling
The programme which is selected first will
keep on going even if the position of the
programme selection button is changed. A
new programme can be selected or started
after “Programme is cancelled” in order to
change the washing programme.
To cancel any selected programme;
Press “Start/Pause/Cancel” button
for 3 seconds. At the end of this time,
“Start/Pause/Cancel” light and all lights
go off and “Spin” lamp illuminates. If
the door is unlocked, all lights on the
indicator will go off and the “Ready”
lamp will illuminate. You can select
and start a new programme when the
“Ready” light is lit.
The machine can drain all the water or
can take in water for 3 times at most
to cool down the clothes and complete
the draining process. Also the “Spin”
light illuminates if the cancellation
process is activated in the middle
of the programme. The “Spin” light
goes off when discharging process is
completed. The door can be opened
and a new programme can be selected
when the “Lid” lamp illuminates.
End of programme
The “Ready” lamp on the programme
follow-up indicator will light up when the
programme comes to an end. The door
can be opened and the machine becomes
ready for a second cycle.
Press the “On/Off” button to shut down the
machine.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WM 5120 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WM 5120 S in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info