762622

BEKO WDL742441 Manual

30
Zoom out
Zoom in
Previous page
1/44
Next page
30 / EN Washer-Dryer / User Manual
5.12.3 Extra Dry
Drying continues until the drying level reaches
the Wardrobe Extra Dry step.
C
INFORMATION
• The dryness level might change depending
on the mix of laundry, type of material,
amount and wetness level of the laundry.
• Do not use the machine to dry laundry that
contains lace, tulle, bling, beads, paillette,
wire etc. or laundry with high silk content.
5.12.4 Time based
drying - minutes
You can select 30, 90 or 150 minutes drying
to reach the desired dryness level at a low
temperature.
C
INFORMATION
• When drying small amount of laundry (2
pieces maximum), select the timed drying
steps in the Cottons or Synthetics drying
programmes.
• If the laundry has not reached the desired
dryness level at the end of the drying
programme, you can select timed drying to
end the process.
• When this function is selected, the machine
performs drying for the adjusted time
irrespective of the drying level.
5.13 Time display
While the programme is running, the time
remaining to the end of the programme will be
displayed in hours and minutes, e.g. “01:30”.
C
INFORMATION
• Programme time may differ from the values
in section "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of
laundry, auxiliary functions selected and the
changes in the mains voltage.
5.14 End Time
-
With the
End Time
function, start of the
programme can be delayed up to 24 hours.
After pressing the
End Time
button, the
programme's estimated end time will be
displayed. If an
End Time
is set, the
End Time
light will turn on.
To ensure that the End Time function is enabled
and the programme ends at the end of the
defined duration, you should press
Start /
Pause
after setting the duration. The
Start/
Pause
button will stop flashing and remain on.
If you want to cancel End Time function, press
the
End Time
button until the End Time light
turns off or press the
On/Off
button to turn off
and on the machine.
1. Open the loading door, place the
laundry and add detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Press the
End Time
button to set the desired
end time. The
End Time
light will turn on.
4. Press the
Start / Pause
button. Countdown
will start. ":" sign in the middle of the end
time on the display will start flashing.
C
INFORMATION
• Do not use liquid detergents when you
enable the End Time function! Stains might
remain on the clothes.
• The door will remain locked during the End
Time countdown. If you want to unlock
the door, press the programme start/
pause button to switch the machine to
pause mode. At the end of the countdown,
End Time indicator turns off, washing
cycle starts and the time of the selected
programme appears on the display.
• When End Time is selected, the time
displayed on the screen consists of the
end time plus the duration of the selected
programme.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WDL742441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WDL742441 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info