817031
37
Zoom out
Zoom in
Previous page
1/56
Next page
37 / EN Washer-Dryer / User Manual
When Remote Control is enabled, you can only
manage and switch off the machine and follow
status on the washing machine. All functions
except child lock can be managed through the
application.
You can check the function indicator on the key
to follow whether the Remote Control function is
On or Off.
If the Remote Control function is Off, all the
operations are handled on the washing machine
and only status follow-up is allowed on the
application.
If the Remote Control function cannot be
enabled, you will hear a warning after pressing
the button. This might occur if the product is
switched on or if there is no product paired
through Bluetooth. Bluetooth setting being Off
or the washing machine's door being open are
examples for such cases.
When you enable this function on the washing
machine, said function will remain on except
for certain cases, allowing you to control your
washing machine remotely via Bluetooth.
In certain cases, it deactivates itself for
safety reasons:
When your washing machine
undergoes a power interruption.
When the programme knob is turned
to select a different programme or
when the product is switched off.
5.21.4 Troubleshooting
Follow the steps below if you are having problem
with controlling or connection. Observe whether
the problem persists or not after the action you
have performed. Do the following if the problem
is not resolved.
Check whether your smart device is
connected to the relevant home network.
Restart the product application.
Turn Bluetooth off and on through
the user control panel.
If the connection cannot be established
with the above processes, repeat the initial
set-up settings on the washing machine.
If the problem persists, consult an
Authorised Service Agent.
6 Maintenance and cleaning
Service life of product extends and frequently
experienced problems will be reduced if it is
cleaned at regular intervals.
6.1 Cleaning the detergent drawer
Remove any powder residue buildup in the
drawer. To do this;
II
II
I
1. You can remove the detergent drawer
by pulling it towards yourself strongly.
C
INFORMATION
If more than a normal amount of softener
and liquid detergent mixture starts to
remain in the softener compartment, the
siphon must be cleaned.
2. Wash the drawer and the siphon with
plenty of lukewarm water in a washbasin.
Wear protective gloves or use an
appropriate brush to avoid touching the
residues in the drawer when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon
is in its original location.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WDIK854451 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WDIK854451 in the language / languages: English as an attachment in your email.

The manual is 4.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info