762656
33
Zoom out
Zoom in
Previous page
1/52
Next page
33 / EN Washer-Dryer / User’s Manual
6 Maintenance and cleaning
Service life of product extends and frequently
experienced problems will be reduced
if it is cleaned at regular intervals.
6.1 Cleaning the detergent drawer
Remove any powder residue buildup
in the drawer. To do this;
II
II
I
1. You can remove the detergent drawer
by pulling it towards yourself strongly.
C
INFORMATION
If more than a normal amount of softener
and liquid detergent mixture starts to
remain in the softener compartment,
the siphon must be cleaned.
2. Wash the drawer and the siphon with
plenty of lukewarm water in a washbasin.
Wear protective gloves or use an
appropriate brush to avoid touching the
residues in the drawer when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon
is in its original location.
6.2 Cleaning the loading
door and the drum
For products with drum cleaning
programme, please see Operating
the product - Programmes.
For products without drum cleaning programme,
follow the below steps to
clean the drum
:
Select
Additional Water
or
Extra Rinse
auxiliary functions. Use Cottons
programme
without pre-wash. Set
the temperature to the
level recommended on the drum cleaning
agent
which can be found in the detergent aisle
in supermarkets
.
Apply this procedure
without
any laundry in the product
. Before starting
the programme, put 1 pouch of special drum
cleaning agent (if the special agent could not
be supplied, put max. 1 tea-cup of (max. 100
g) of antilimescale powder) into the main wash
detergent compartment. If the antilimescale
is in tablet form, put only one tablet into the
main wash compartment no. "2". Dry the
inside of the bellow with a clean piece of cloth
after the programme has come to an end.
C
INFORMATION
Repeat Drum Cleaning process
in every 2 months.
Use an anti-limescale suitable
for the washing machines.
After every washing and drying make sure
that no foreign substance is left in the drum.
If the holes on the bellow shown in the figure
are blocked, open the holes using a toothpick.
C
INFORMATION
Foreign metal substances will cause
rust stains in the drum. Clean the
stains on the drum surface by using
cleaning agents for stainless steel.
Never use steel wool or wire wool.
A
CAUTION!
Never use sponge or scrub materials.
These will damage the painted,
chrome and plastic surfaces.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WDIK752121F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WDIK752121F in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info