582419

BEKO WDA 91440 W Manual

61
Zoom out
Zoom in
Previous page
1/64
Next page
User’s Manual 61 / EN
Troubleshooting
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any
damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**)Regulardrumcleaningisnotapplied.>>>Clean the drum regularly. See, 6.2
ACAUTION
¾If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorised Service Agent. Never try to repair a
nonfunctional product yourself.
Drying process lasts long.
• PoresoftheAirinletfilterinfrontofthemachinemightbeclogged.>>>Wash the Air inlet filter with lukewarm
water.
• TheAirinletfilterinfrontofthemachinemightbeblocked.>>>Remove everything, if any, that is blocking ventilation
in front of the Air inlet filter.
• Ventilationmaybeinadequateduetotheverysmallareaofinstallation.>>>Open the doors and windows to avoid
too much increase in the ambient temperature.
• Excessivelaundrywasloadedin.>>>Do not overload the Washer-Dryer.
• Laundrymaynothavebeenspunadequately.>>>Have the Washer-Dryer perform spin in a higher spin speed
during washing step.
• Tapisturnedoff.>>>Open the taps.
Laundry remains wet at the end of drying.
• Improperprogrammemighthavebeenusedforthelaundrytype>>>Select a proper programme for the type of the
laundry by checking the maintenance tags on the clothes or use time programmes additionally.
• PoresoftheAirinletfilterinfrontofthemachinemightbeclogged.>>>Wash the Air inlet filter with lukewarm
water.
• Excessivelaundrywasloadedin.>>>Do not overload the Washer-Dryer.
• Laundrymaynothavebeenspunadequately.>>>Have the Washer-Dryer perform spin in a higher spin speed
during washing step.
Machine does not turn on or the programme does not start.
• Powercablemightnotbepluggedin.>>>Make sure that the power cable is plugged in.
• Programmemightnot be set or Start / Pause /Cancelbuttonmightnot be pressed.>>>Make sure that the
programme has been set and the machine is not in Pause mode.
• Ensuredrainhoseheightandpositioniscorrectsee“Installation”
• Childlockmightbeenabled.>>>Deactivate the Child Lock.
Laundry is shrunk, yellowed, felted or damaged.
• Improperprogrammemighthavebeenusedforthelaundrytype>>>Select a proper programme for the type of the
laundry by checking the maintenance tags on the clothes or use time programmes additionally. Laundry not suitable
for drying should not be dried.
Drying cannot be performed
• Laundrymightnotbedryordryingfunctionhasnotbeenenabled.>>>Check if drying function is also selected after
the selected washing programme.
Loading door cannot be opened.
• Loadingdoorofthemachinemaynotbeopenedduetosafetyreasons.>>>If "wait to cool down to open...."
warning is displayed, machine will keep the loading door locked for your safety until it cools down. You can accelerate
cooling by running any 10-minute drying programme.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WDA 91440 W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WDA 91440 W in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info